New Yamaha 350 Outboard?
#1
Registered
Platinum Member
Thread Starter
Join Date: Nov 2000
Location: Lake Lanier - N. Georgia
Posts: 6,307
Likes: 0
Received 1 Like
on
1 Post
New Yamaha 350 Outboard?
What do you guy's know about this new engine? We had a staff meeeting this morning , we have decided to build a 38 CC. The bottom plug is sitting at the shop and we'll be working on the deck / liner soon. Can't wait!
http://www.lake-link.com/info/pressr...sReleaseID=137
http://www.lake-link.com/info/pressr...sReleaseID=137
#7
Registered
Join Date: Jan 2005
Location: Wi/ Fl Keys
Posts: 3,231
Likes: 0
Received 0 Likes
on
0 Posts
#9
Registered
Join Date: Nov 2006
Location: Mentor , Ohio
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts
Yeah , I was all jacked up on the new yammy until I found out about the weight ..... Merc has the new Verado dialled in pretty good ..... the 300xs requires good fuel ..... If you do the math , the 300 HPDI is still has the best power to wt. ratio , unless you can run the good fuel all the time ... which I cannot .... Brian , I will be following this very closely ! Whats you expected first build date ?
#10
Registered
Platinum Member
Thread Starter
Join Date: Nov 2000
Location: Lake Lanier - N. Georgia
Posts: 6,307
Likes: 0
Received 1 Like
on
1 Post
Yeah , I was all jacked up on the new yammy until I found out about the weight ..... Merc has the new Verado dialled in pretty good ..... the 300xs requires good fuel ..... If you do the math , the 300 HPDI is still has the best power to wt. ratio , unless you can run the good fuel all the time ... which I cannot .... Brian , I will be following this very closely ! Whats you expected first build date ?
I'm waiting on quotes now from several tooling companies. Early 08 for sure! We're going to offer some " BLOWOUT" deals to help pay for the tooling. I'll keep you posted.