Offshoreonly.com - starting egine w/ no water

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - starting egine w/ no water (https://www.offshoreonly.com/forums/general-boating-discussion/205520-starting-egine-w-no-water.html)

hammer01

03-25-2009 12:26 PM

Quote:

Originally Posted by GLH (Post 2828670)

Why?

This was the best response GLH!! Good one! It only takes about 2 minutes to hook up a hose and run water to the water muffs for the outdrive. No reason to potentially cause damage when the cost of the muffs is less than an impellor kit!
Sorry, just my thoughts.

brian18330

03-25-2009 01:10 PM

I didnt want to run water through the ngines yet....shouldnt freeze but didnt want to take the chance.

GLH	03-25-2009 01:55 PM

Quote:

Originally Posted by brian18330 (Post 2828815)

I didnt want to run water through the ngines yet....shouldnt freeze but didnt want to take the chance.

Jerry rig muffs with a hose in a 5 gallon bucket or two of winterizing fluid.

BTW don't do that over grass.... My father in law had a 20' circle of dead grass for a summer a few years back he was really proud of me for!!! :drink:

All times are GMT -5. The time now is 10:44 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page