ssm V props
does anyone have or know where to get 3 blade ssm V props?
- 26 spline - 17/17.5 x 31/32 thanks |
Why would you want to run 3 blade instead of 4? Seems odd.
|
i have a 1980 39' cigarette and its a straight bottom with #V's and about 1400 total hp and i tried one pair of 3 blade props from the era of the boat and they have worked the best so far. the 4 blades just dont seem to work as well as the 3 blades
- i have not been able to find any other sets though and would like to try some more sizes in the 3 blade but they are impossible to find -know of anything around? |
call randy at cobra power he has tons
|
I have a pair of 17x29 and 16 3/4 28 in 3 blade, also have some 16 1/4 x 29 5 blade.
|
4 blades
i have tried 17x30 4 blades which were too big, 16x29 which gave me trouble getting on plane because of the small diameter,17x29 which wouldnt spin enough, 3 blades i tried a set of 17x30 which worked very well with 0 vibration which was a nice surprise but if i could get a set of 17x31/32 i think those would work best. - i am full stagger so i cannot go more than 17.5 diameter and it seems i cannot turn anything bigger than a 29 4 blade do you have anything i am looking for daredevil? thanks for the help |
ok thank you, for 4 blades im looking for 17x26/27
anyone else have anything about 3 blades? |
All times are GMT -5. The time now is 06:53 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.