27 Glasstream is running bow down and slow I could uses help
I have a 27 glasstream I bought through insurance it was completely stripped origanally had 1 engine. I have rebuilt boat with two 250 efi Yamahas and can only get it up to 58 mph at 5400. I have put nose cones on it with low water pick ups and manual jack plates. I am running 25 miriage props with a countrer. I am not sure what side the counter should be on I have tried it both ways to try and get bow lift I am not sure about what style of prop I should run or what heigth I sould be. I here of big mph numbers out of these boats but I am not even in the ball park.
|
Spin the props in for bow lift, maybe 4 blades?
|
Try corking the front live well. It will fill and not drain. Is it a scx or ccx? Also that boat loves bravos or power tec 4 blades.
|
It is a scx will 4 blade give me bow lift?
|
Usually they offer stern lift. That boat just loves 4 blades for some reason. Never had any luck with 3 blades on that boat at all.
|
What pitch should I start with?
|
those motors turn around 5750 or so. i wold see if i could try a 24 or 26. you might call power tec and see what they recomend. Also either size bravo. try and find a dealer with blue ones. They are the loaners.
|
I was on one last weekend w/ 225 optis, I think he is getting close mid to upper 70's the thing takes off like a rocket. definitely running 4 blades not sure on the pitch, it's a light boat and it was rough so we took a beating
this was an 04 scx |
Pete280 Any issues with the o4 boat ? I'm interested in the boat, but not many made so information is scketchy
|
I thought it was a decent boat, definitely not made for rough water, we came back from the eastern shore in honest 3-4's and it was brutal. If you up on the James or somewhere protected I think it's a good boat. With 225's it flew,
btw, it seemed to run flat to bow down, but that was probably due to the seas |
All times are GMT -5. The time now is 02:04 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.