What would be the advantage of a titanium prop?
thinner blades due to stronger material? |
Originally Posted by SHAWN DAVIS
(Post 3195052)
What would be the advantage of a titanium prop?
thinner blades due to stronger material? |
Originally Posted by SHAWN DAVIS
(Post 3195052)
What would be the advantage of a titanium prop?
thinner blades due to stronger material? They would be able to hold up to thinner cuts better than the current forged wheels. The forged ones are so sweet, but so thin that they are easily damaged. |
Originally Posted by mpally
(Post 3194429)
Darr didn't run 157 either. He was around 120.
|
You beat yorkman by 4 mph.:coolcowboy:
|
Originally Posted by skater40
(Post 3195720)
You beat yorkman by 4 mph.:coolcowboy:
Give me a few weeks and I'll be kill'en Billy.:evilb: |
That will be easy to do.:coolcowboy:
|
Originally Posted by skater40
(Post 3195720)
You beat yorkman by 4 mph.:coolcowboy:
|
1 Attachment(s)
Originally Posted by WeaponX
(Post 3196763)
I'm about to do what you told me and pull off the 16" boxes off the back and then it should be set up right. Just a little late for the Shootout.
Give me a few weeks and I'll be kill'en Billy.:evilb: OK Fcukre you'll need more then a few weeks , add the 1.5" spacer and put the 21 degree rake 6 blades props on :evilb: U can alwayz send it over to BIG Leon @ Dereberry and he'll set it up right 4 ya'll ,good luck |
Originally Posted by RunninHotRacing158
(Post 3197516)
OK Fcukre you'll need more then a few weeks , add the 1.5" spacer and put the 21 degree rake 6 blades props on :evilb:
U can alwayz send it over to BIG Leon @ Dereberry and he'll set it up right 4 ya'll ,good luck I may need some 7 blades and a rocket.:drink: |
All times are GMT -5. The time now is 03:18 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.