Offshoreracr

Anybody looking for a set of 557's and a set of SSM 3A's let me know.

boot

Oh come on ! If Geoo can put 800 hp in a 18 ' Donzi , I'm sure you can learn to live with too much power !

CigDaze

Too big?....In a 33' Boat?

Offshoreracr

The truth is my wife doesn't like the really fast stuff so I had to buy a slow boat from China. My Coyote caught on fire on the trailer after a rough water run. Bought it back from the insurance company because the fire didn't touch the motors or the drives.

CigDaze

Ahhhh....I knew there had to be a logical explanation. Good luck.

INCOGNITO

NEED SPECS ON MOTORS//HORSEPOWER //HOW MANY HOURS//SOME MORE INFO PLEASE AND OF COURSE PRICE...

KAAMA

iTrader: (1)

Incog,
send me some info as well on your engines and drives, i.e. specs, prices, etc. or give me a call 616-291-7932

Mark/KAAMA

Offshoreracr

The motors have crower cranks, rods and bolts, JE blower pistons 8.5 comp. merlin heads, manley valves, the bigest crane hyd. roller cams, weiand tunnel rams, CMI headers, approx. HP 650-700. there were alot of changes since the last dyno. Drives are SSM#3A's with 1.6 gears. Moters have 25-30 hours on them since they were freshened up. 1 block is a new merlin block the other is a bowtie. the rev limiters are set at 5450rpms so they were never turned real hard. I would like 16K for the motors w/exhaust and 15 for the whole drive package: drives, transmission, lathem, props. You can call me at 757 721-3163 or 757 621-0750 email [email protected]
Pictures are at www.onsitecomputers.net/tommy

P.S. I'll take 28K for the whole deal including the trailer, I the motors can be run in the boat.