BEWARE of Power Marine and Blown1500
07-17-2003, 08:52 PM
#111
Registered
Thread Starter
Join Date: Nov 2002
Location: Huntersville, NC
Posts: 641
Likes: 0
Received 0 Likes
on
0 Posts
please don't take delight in my mess
it is now up to the integrity of the board as to what outcome we have.
heck -- i'll buy the beers at north harbor!
it is now up to the integrity of the board as to what outcome we have.
heck -- i'll buy the beers at north harbor!
07-17-2003, 08:55 PM
#112
Registered
Join Date: Sep 2002
Location: Charlotte, nc.
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mpejsa
please don't take delight in my mess
it is now up to the integrity of the board as to what outcome we have.
heck -- i'll buy the beers at north harbor!
please don't take delight in my mess
it is now up to the integrity of the board as to what outcome we have.
heck -- i'll buy the beers at north harbor!
I will be there and hopefully in my boat. And lets hope no one needs a tow.
07-17-2003, 09:02 PM
#113
Registered
Join Date: Apr 2001
Location: beaumont tx
Posts: 1,703
Likes: 0
Received 0 Likes
on
0 Posts
wow this is getting complicated, I just hope it works out for the people that have been hurt, it can be easy if the original parties in this do what is right,
07-17-2003, 09:03 PM
#114
Registered
Join Date: Dec 2000
Location: Bell Canyon, CA
Posts: 12,754
Likes: 0
Received 0 Likes
on
0 Posts
Because of this stupid website, people now call me PhantomChaos, or Phantom, or just Chaos. Doesn't even mater what my real name used to be!!
YEP!
I went down this road late last year with a client. They received an expensive unit of ours, and their specific application of our product revealed what could be considered a minor flaw in the design.
Nearly six months later, we championed the issue after a huge engineering redesign, hundreds and hundreds of hours of labor, and 10's of thousands in new components and PCB's. The only original part in the four-drawer design was the friggin outside sheet-metal casings!
Our client stuck by us during this period hoping that we would come through as they were committed to us as well with software development specifically for our product.
We now have a client for life, and a major reference for future potential clients.
I hope this all works out for all parties..........I guess we'll find out next week unless this thread has pre-poof tendencies.
YEP!
I went down this road late last year with a client. They received an expensive unit of ours, and their specific application of our product revealed what could be considered a minor flaw in the design.
Nearly six months later, we championed the issue after a huge engineering redesign, hundreds and hundreds of hours of labor, and 10's of thousands in new components and PCB's. The only original part in the four-drawer design was the friggin outside sheet-metal casings!
Our client stuck by us during this period hoping that we would come through as they were committed to us as well with software development specifically for our product.
We now have a client for life, and a major reference for future potential clients.
I hope this all works out for all parties..........I guess we'll find out next week unless this thread has pre-poof tendencies.
07-17-2003, 09:05 PM
#115
Registered
Join Date: Dec 2000
Location: Bell Canyon, CA
Posts: 12,754
Likes: 0
Received 0 Likes
on
0 Posts
Oh yeah........and I think the Democrats have something to do with this engine problem (about the only element missing from this thread).
Platinum Member
Holy Chit
07-17-2003, 09:18 PM
#117
Registered
Join Date: Mar 2003
Location: s.c
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
dang, and i just got another Bucket popcorn.
07-17-2003, 09:19 PM
#118
Registered
Join Date: Mar 2003
Location: s.c
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
dang, and i just got another Bucket popcorn.
07-17-2003, 09:20 PM
#119
Charter Member #37 /Moderator/Platinum Member
Charter Member
Wow what a turn of events unfolding here. Mark P I will be the first one to help tie that bad boy up at the meeting. Keep me up
to date on whats happening. The club and its members will do what we can to help, I feel sure of that.
Now as far as this thread goes I see two problems ; Bobby Daniels is Jack Bailey ok I understand that but if Jack Bailey
is Cesnna and some others I don't agree with that. This board has always been a great site and the gods have done a great job at building this website. If people are using multiple screen names then thats decieving. Its easy to hide behide a computer and type insults and poke fun at others. Thats all good but when it comes down to business then thats another story.
David Ledford
Carolina Power Boat
President
to date on whats happening. The club and its members will do what we can to help, I feel sure of that.
Now as far as this thread goes I see two problems ; Bobby Daniels is Jack Bailey ok I understand that but if Jack Bailey
is Cesnna and some others I don't agree with that. This board has always been a great site and the gods have done a great job at building this website. If people are using multiple screen names then thats decieving. Its easy to hide behide a computer and type insults and poke fun at others. Thats all good but when it comes down to business then thats another story.
David Ledford
Carolina Power Boat
President
__________________
Champagne taste on a beer Budget
C. P. B. A. Carolina Power Boat Assoc
Champagne taste on a beer Budget
C. P. B. A. Carolina Power Boat Assoc
07-17-2003, 09:31 PM
#120
Registered
Join Date: Mar 2003
Location: s.c
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Would someone pass me another bucket of popcorn ?
