Weight of #6 vs ASD-8
#1
Platinum Member
Platinum Member
Thread Starter
Weight of #6 vs ASD-8
Anyone know the weight difference between the two, including transmissions. Thanks Jeff
#3
Platinum Member
Platinum Member
Thread Starter
Re: Weight of #6 vs ASD-8
MTM, I haven't really tried, I have had 5 offers, and had to turn them away, cause I had someone buying the boat. But...that 3 month ordeal just fell through, alot of strokes in this world, and dummy me, should have collected a deposit, and not take the persons word. I'm going to the FT Laud. show to check out the latest changes and fads, and then order a new one, if can be traded in. Plan B. is if I don't get a new boat, I will be selling everything off the transom back and setting my Nortech up with new Weisman drives, and then upgrading my power with Whipples, should be a nice winter project. Sandy says "your never happy", always changing your boats and cars, the only thing I've kept is her for 19 years. Thanks Jeff
#4
Platinum Member
Platinum Member
Join Date: Mar 2004
Location: Hillsborough,NJ
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
Re: Weight of #6 vs ASD-8
Jassman,
Heres a page from Arneson they list all the specs for all their drives. http://arneson-industries.com/Arneson%20Ratings.htm
I couldn't find a weight spec for the #6.
Hope this helps.
Heres a page from Arneson they list all the specs for all their drives. http://arneson-industries.com/Arneson%20Ratings.htm
I couldn't find a weight spec for the #6.
Hope this helps.
#8
Registered
Join Date: Nov 2002
Location: Bonita Springs, Florida
Posts: 3,029
Likes: 0
Received 1 Like
on
1 Post
Re: Weight of #6 vs ASD-8
Tranny weighs approx 85-100 lbs.
#8 approx 300 lbs.
Transom plate 30 lbs
Drop Box 125 lbs
two gears 10 lbs each
chain 35 lbs
tail shaft 35 lbs
torque tube 35 lbs
2 ratio sleeves 2 lbs each
Fluids and bearings
#8 approx 300 lbs.
Transom plate 30 lbs
Drop Box 125 lbs
two gears 10 lbs each
chain 35 lbs
tail shaft 35 lbs
torque tube 35 lbs
2 ratio sleeves 2 lbs each
Fluids and bearings
Last edited by expresscat39; 10-09-2004 at 02:22 PM.