gotime34

I saw a complete TRS rebuild kit on ebay a few weeks ago for about $900.00. Is this thing lagit? What does it include and where can I get one???

Lofty

I've got the "Ultimate" TRS rebuild kits. Will run you about $10k a side including gimbals. It's called a Konrad! Just busting your balls dude.... Sounds pretty cheap and I've never heard of a "kit". I would check it out 1st.

Fionn
O'Neill Offshore Marine
[email protected]
925.952.4240
510.541.8124

CN24

Never heard of one either but I have a drive and gimbal assembly I'll part with.

mtgbiker

Have a friend in need of a port side upper,lower and maybe gimbal assembly. Which is yours? PM me with a price please.

Lofty

I don't want to tread on carm here but if he doesn't have an upper I do. I also have a complete drive or two. Let me know.

Fionn
O'Neill Offshore Marine
[email protected]
510.541.8124
925.952.4240

gotime34

I want the Konrads, just can't afford them right now. I guess I'll just keep rebuilding the TRS's for now. But I'd rather do it myslef than pay someone $1500 to do it for me.

spk1

I've got some TRS Drives also, I am waiting for one to break so I can feel good about a fresh rebuild, ha Any way the lower end casing on my starboard side has a small crack due to electrolysis, what do I do to fix that casing cheap, before I lose the gears? do I have to replace the entire lower end? any ideas? thanks

BBB

last week, replaced a prop shaft in port trs, bad thing is while removing the retaining ring the housing cracked, welded crack and got everything all back together, test run this weekend, if it dosent hold it will be 1200.00 for a new lower housing. B.O.A.T.

Lofty

Good luck with that weld, I've seen that tried that before with little success.

spk1

You can weld on those lower housings? Any Special welding techniques? My crack is about two inches long from the prop moving to the rear 1cm wide. And is mine fails, where do you locate a new housing I tryed mercruiser, but no luck?