Water temp for a 454mag efi
#1
Registered
Thread Starter
Join Date: Apr 2004
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Water temp for a 454mag efi
What should my water temp be running on a 96 454mag efi? It seems to take forever to warm up and then reads about 125 until ?I get on it. Then runs about 150
#2
Registered
Join Date: Nov 2003
Location: Melbourne, FL
Posts: 1,243
Likes: 0
Received 0 Likes
on
0 Posts
Re: Water temp for a 454mag efi
Sounds your thermostat isn't present or it's not working. My efi 454's are fresh water cooled and specs say 160 degree stat--raw water stat is 140 degree.
Mine run aroune 150-160 at cruise (3200RPM) kick up to 170-180 at WOT.
Boat is a Formula SR357 with TRs drives and weighs over 10K. Engines are MarinePower 454 EFi using Arizona Speed TPI.
Mine run aroune 150-160 at cruise (3200RPM) kick up to 170-180 at WOT.
Boat is a Formula SR357 with TRs drives and weighs over 10K. Engines are MarinePower 454 EFi using Arizona Speed TPI.
#3
Registered
Join Date: Jun 2001
Location: Lehigh Valley, Pennsylvania
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
Re: Water temp for a 454mag efi
I'll ditto that.... Sounds like thermostat is stuck open and allowing continuous water flow to the engine thus preventing it from warming up to where it should be... The thermostat is an easy swap out..... just yell if your not sure how to..... Good luck!