Hone finish question
#1
Registered
Thread Starter
Join Date: Jul 2004
Location: STEVENS POINT WI
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Hone finish question
OK guys i am looking at freshening up my 540. it is out of the boat and i am looking at finding a bead hone that will put down a 400 finish for the correct finish for plasma molly rings. Does anyone here know where i could find something like that. I have about 60hrs on my current combo and just need to break the glaze. Or will the standard 220 grit bead hone leave a acceptable finish for plasma file fit rings?
#3
I hate the winter!!
Platinum Member
Join Date: Jul 2001
Location: long island, new york
Posts: 2,707
Likes: 0
Received 0 Likes
on
0 Posts
Re: Hone finish question
Originally Posted by Crazyhorse
Take it to a trusted local shop and they will deglaze it with a good hone or honing machine.
Leave the ball hone in the drawer.
Leave the ball hone in the drawer.
#5
Registered
Join Date: Jan 2001
Location: Holland MI
Posts: 3,140
Likes: 0
Received 0 Likes
on
0 Posts
Re: Hone finish question
Originally Posted by TylerCrockett
You need to put a torque plate back on the block and rehone it in a honing machine. Did you hone it with a torque plate the first time??