Help with plumbing an electric fuel pump.
09-11-2009, 12:48 PM
#1
Registered
Thread Starter
Join Date: Jun 2009
Location: Braceville, IL
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Help with plumbing an electric fuel pump.
I'm looking at swapping from a manual fuel pump to an electric Holley. My tank does not have an extra tap for a return. Can I tie into the suction of the pump?
09-11-2009, 12:58 PM
#3
Registered
iTrader: (2)
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
mrfixxall
mount it as close th the tank as possible and low in the hull,also you need to suck the fuel through a filter..theirs several ways to hook it up through a regulator.call me if you would like i have several ways of doing it..
09-11-2009, 04:17 PM
#4
Registered
Join Date: Jan 2009
Location: Wilson, NY
Posts: 935
Likes: 0
Received 0 Likes
on
0 Posts
I dont know what kinda power your making...but a Holley Black (140 gph) should be enough for you...and they dont need a return line..just buy the recommended regulator. Check out Summit Racing sir.
09-11-2009, 06:48 PM
#6
Registered
http://teaguecustommarine.com//store...l_manifold.pdf
You can find this and several other drawings at teaguecustommarine.com under the Tech Tips section.
You can find this and several other drawings at teaguecustommarine.com under the Tech Tips section.
