Help - looking for water 525sc water pump part
 

Hi guys
I'm looking for the rear part of the sea water pump for my 525sc. It's particular because inlet and outlet are horinzotal...

Somebody could help me ??? In Italy nobody can find it

Thanks

SIMONE

http://img15.imageshack.us/img15/4812/fotodm.jpg

http://img263.imageshack.us/img263/2791/foto1dp.jpg

I believe there was someone awhile back that had this style of rear covers on their pumps, cam stock on a 525SC engine. A quick look on the internet showed that MIAMI MARINE SPECIALISTS, 1950 N.E. 135th St., North Miami, Fl, 33181
Phone (305)945-7997 | Fax (305)945-3675 has one in stock. I recently convereted my standard pump cover to something similar to you current stlye by installing two 90 degree barbed plastic fittings. Hope that this helps.

Cliff

looks like u could put the new kit on there and it would work.

I know on my Pantera, I had to keep using the original set up like he has. I tried installing a plastic housing kit and it would hit my engine mount. Not sure if the original style back plates are available anywhere.
It looks like it may be part #7 in this diagram, but the price is nuts($175) and the pic does not show the back side.
http://www.mercruiserparts.com/Show_...+PUMP+ASSEMBLY

Looks like the one side is rusted away pretty bad.

CP has a billet back cap that you can put fittings on. But by the time you buy the cap and the fittings, you aren't going to be too far away price-wise from an exact replacement from Merc like what Griff posted.

http://www.cpperformance.com/p-329-b...p-end-cap.aspx

http://www.cpperformance.com/images/.../125-40014.jpg

http://www.cpperformance.com/c-640-c...-fittings.aspx