Accessory drive pulley question
#1
Registered
Thread Starter
Join Date: Aug 2010
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
Accessory drive pulley question
I am changing my blower setup from a B&M 250 to a BDS 871 bllower and they have two different accessory drive pulley one 3V for marine use (5'') and the standard 3V accessory drive pulley that they are bigger arond 6.75'' i believe.
My question is, Can i use the std bigger 3V accessory drive pulley with the Mercruiser fuel/raw water pump ?
Thanks for any advice.
My question is, Can i use the std bigger 3V accessory drive pulley with the Mercruiser fuel/raw water pump ?
Thanks for any advice.
Last edited by supermx96; 04-11-2015 at 06:32 PM.