Need some Help with a Leaky Bearing Seal
06-01-2003, 08:27 PM
#1
Registered
Thread Starter
Join Date: May 2003
Location: Long Island
Posts: 817
Likes: 0
Received 0 Likes
on
0 Posts
Need some Help with a Leaky Bearing Seal
Need help changer 256 Holly-Weiand Bearing Seal
I have a leaky bearing seal on my Holly-Weiand blower Drive belt Pully.
2001 575 SCI Motor
Where can I get a service manual?
Can I change the bearing seal without removing the bearing off the shaft?
Need some help here.
Fred
I have a leaky bearing seal on my Holly-Weiand blower Drive belt Pully.
2001 575 SCI Motor
Where can I get a service manual?
Can I change the bearing seal without removing the bearing off the shaft?
Need some help here.
Fred
Last edited by WetKitty42; 06-01-2003 at 11:45 PM.
06-01-2003, 10:54 PM
#2
Charter Member # 55
Charter Member
Not sure on the 250 blower, but I know on a B&M 174, the seal is just pressed in. Just needed to take off the pully, remove the seal and carefully tap the new one in.
06-02-2003, 12:28 PM
#4
Charter Member # 55
Charter Member
Not 100% sure on the 250's. On the 174, I just had to remove the top pulley and then pry out the old seal and press in the new one. It's very similar to seal for a harmonic balancer.
Is it leaking oil around the top pulley????
Is it leaking oil around the top pulley????
