Perko (battery) switch
02-21-2002, 04:40 PM
#1
Registered
Thread Starter
Join Date: Jan 2002
Location: South Louisiana
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Perko (battery) switch
Powerquest mounted the Perko switch under the rear deck cover. With the switch being mounted there, it is really useless. Think about it, if you turn your batteries off, then you can't lower the cover! Is this normal for PQ?
02-21-2002, 04:51 PM
#2
Charter Member
Charter Member
Join Date: Oct 2000
Location: Lake Orion, MI. USA
Posts: 1,560
Likes: 0
Received 0 Likes
on
0 Posts
In my PQ there under the rear bench - no problem. In my eliminator it is the same way as yours. But I have a access hole behind the bench cushion that I can reach through and turn it on. Depending on the hatch ram you have you may be able to lift the hatch up - heavy - to access too.
__________________
Ray
Ray
02-21-2002, 06:43 PM
#3
Julio,
I bought a 2000 in November. I am currently in the process of running dual batteries. I mounted the switch in the storage area on the starboard side. This is very much a pain in the butt to run battery cables that long, but I agree with you - it's virtually useless to have the battery switch in the engine compartment.
I bought a 2000 in November. I am currently in the process of running dual batteries. I mounted the switch in the storage area on the starboard side. This is very much a pain in the butt to run battery cables that long, but I agree with you - it's virtually useless to have the battery switch in the engine compartment.
