Bravo 1 vs. Revolution 4
07-26-2007, 12:03 PM
#11
Offshoreonly Advertiser
Offshoreonly Advertiser
Hey Pat,
We can't because of the geometry of the Mach.
The pitch progression, rake and diameter are different. We could make a similar replica as far as the blade shape but the rake and diameter wouldn't be matchable. The Mach may run better than now though if we changed that blade shape. It would be a experiment.
Brett
We can't because of the geometry of the Mach.
The pitch progression, rake and diameter are different. We could make a similar replica as far as the blade shape but the rake and diameter wouldn't be matchable. The Mach may run better than now though if we changed that blade shape. It would be a experiment.
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
07-26-2007, 01:06 PM
#12
VIP Member
VIP Member
Hey Pat,
We can't because of the geometry of the Mach.
The pitch progression, rake and diameter are different. We could make a similar replica as far as the blade shape but the rake and diameter wouldn't be matchable. The Mach may run better than now though if we changed that blade shape. It would be a experiment.
Brett
We can't because of the geometry of the Mach.
The pitch progression, rake and diameter are different. We could make a similar replica as far as the blade shape but the rake and diameter wouldn't be matchable. The Mach may run better than now though if we changed that blade shape. It would be a experiment.
Brett
I think I'll put the thing up for sale. If it does not sell, then maybe we'll try that experiment this fall.
Anyone want a RH ø14.5x28p Mach stern driver?
It's been used one time since recon at BBlades.
$200 plus shipping...
__________________
Patrick
Patrick
08-13-2007, 08:38 AM
#13
Registered
