I'm making a lot of progress with my winter project.
#7
Charter Member #927
Charter Member
Thread Starter
Thanks guys.
The hardest part was getting the Gilcoat off the Gil manifilds. I bet I've got 6 hours in each manifold before they could go to the powdercoaters.
I've got 1 more set of Gils and dry pipes if anyone is interested.
The hardest part was getting the Gilcoat off the Gil manifilds. I bet I've got 6 hours in each manifold before they could go to the powdercoaters.
I've got 1 more set of Gils and dry pipes if anyone is interested.
#9
Registered
Join Date: Jul 2001
Location: Tinley Park, IL
Posts: 5,242
Likes: 0
Received 0 Likes
on
0 Posts
Hey Mark,
Looks like you are having fun. I like the flames! They are a nice carry over from the graphics. Did you do any other engine mods besides the exhaust? Be prepared in the spring to do some re jetting even if the cams are the same. My 365's leaned out big time when I installed the Gills. Reasons for injections I guess.
Dan
Looks like you are having fun. I like the flames! They are a nice carry over from the graphics. Did you do any other engine mods besides the exhaust? Be prepared in the spring to do some re jetting even if the cams are the same. My 365's leaned out big time when I installed the Gills. Reasons for injections I guess.
Dan
#10
Charter Member #1093
Charter Member
Join Date: Feb 2001
Location: Lighthouse Point & Ocean Reef FL
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
Looks good Mark. Is that the Super Hawaiian hull??
Hey, if you're spending all this time on the boat, who is tending to the farming, I've gotten use to that popping corn you sent and we're going to need another wreath this Christmas
Steve
Hey, if you're spending all this time on the boat, who is tending to the farming, I've gotten use to that popping corn you sent and we're going to need another wreath this Christmas
Steve