I'm making a lot of progress with my winter project.
I'm making a lot of progress with my winter project.
03-18-2004 | 10:25 PM
#7
Thread Starter
Charter Member #927
Joined: Jan 2001
Posts: 4,834
Likes: 2
From: IN
Thanks guys.
The hardest part was getting the Gilcoat off the Gil manifilds. I bet I've got 6 hours in each manifold before they could go to the powdercoaters.
I've got 1 more set of Gils and dry pipes if anyone is interested.
The hardest part was getting the Gilcoat off the Gil manifilds. I bet I've got 6 hours in each manifold before they could go to the powdercoaters.
I've got 1 more set of Gils and dry pipes if anyone is interested.
03-18-2004 | 10:57 PM
#9
Registered
Joined: Jul 2001
Posts: 5,242
Likes: 0
From: Tinley Park, IL
Hey Mark,
Looks like you are having fun.
I like the flames! They are a nice carry over from the graphics. Did you do any other engine mods besides the exhaust? Be prepared in the spring to do some re jetting even if the cams are the same. My 365's leaned out big time when I installed the Gills. Reasons for injections I guess.
Dan
Looks like you are having fun.
I like the flames! They are a nice carry over from the graphics. Did you do any other engine mods besides the exhaust? Be prepared in the spring to do some re jetting even if the cams are the same. My 365's leaned out big time when I installed the Gills. Reasons for injections I guess. Dan
03-19-2004 | 02:22 AM
#10
Charter Member #1093
Joined: Feb 2001
Posts: 660
Likes: 0
From: Lighthouse Point & Ocean Reef FL
Looks good Mark. Is that the Super Hawaiian hull??
Hey, if you're spending all this time on the boat, who is tending to the farming, I've gotten use to that popping corn you sent and we're going to need another wreath this Christmas
Steve
Hey, if you're spending all this time on the boat, who is tending to the farming, I've gotten use to that popping corn you sent and we're going to need another wreath this Christmas
Steve
