Stereo in a 24?
#12
Registered
Gold Member
Join Date: Jan 2004
Location: 1000 Islands NY
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
Jayhawk one more thing to remember. Be aware that there are two tubes glassed down each side of the boat for wiring and controls. I didn't hit the one on the starboard side but had to do some trim on the port side because I didn't think there is one on that side. Also if I remember correctly mine were not the same heights so take a look forward from the engine comparment to avoid having to fit around those.
#13
Registered
Thread Starter
Join Date: Jul 2005
Location: Tulsa, OK
Posts: 1,729
Likes: 0
Received 0 Likes
on
0 Posts
I'm very familiar with the tubes from installing the hydraulic steering and tearing out the old. My wife and I have gotten proficient at using the fish tape in the Superboat tubes. It should be a fairly easy deal to wire. The other thing I'd be concerned about, is I only have one battery. I suppose I'd need to add a second one for the stereo so as not to drain the starting battery. I hate cutting holes in my boat. I cringed when installing the tab indicators. I had to cut a big hole for that. The stereo and speakers will be even bigger holes!