How's a 572 ci gonna run?
#34
Registered
Re: How's a 572 ci gonna run?
My blower always has a headache so I feal your pain.No blower for me I like the look of the smooth hatch and to get the power I need cubic inch.Now for cubic inch,merlin head 572 and a dominator about 650-675hp and 598 merlin head/dominator 675-700hp You could up those numbers with aluminam AFR heads.GM 502 block have large water passages with thin walls so you can only make so much boost.Buy a real block and you can make crazy power.A big combo now is a 557 with the PSI mongo blower.Ive heard 1100 on pump gas and heard 1400 on CAM2.
Pat my drive is a #4 looks like a #5.6inches shorter than #3
Pat my drive is a #4 looks like a #5.6inches shorter than #3
Last edited by z.zuperboat; 01-27-2005 at 11:28 AM.
#35
Re: How's a 572 ci gonna run?
Here's a primary list of what I'm building. 572ci SUPERSUCKER!
Merlin pro block (10.2 deck)
Callies steel 4340 crankshaft , internally balanced
Oliver I beam rods
J&E pistons
Lunati cam & valve train components
Canfield aluminum cyl. heads
Stainless manley intake valves (2.300)
Inconel manley exh. valves (1.900)
Brodix aluminum single plane intake manifold
Merlin pro block (10.2 deck)
Callies steel 4340 crankshaft , internally balanced
Oliver I beam rods
J&E pistons
Lunati cam & valve train components
Canfield aluminum cyl. heads
Stainless manley intake valves (2.300)
Inconel manley exh. valves (1.900)
Brodix aluminum single plane intake manifold
Last edited by FASTERDAMITT; 01-27-2005 at 05:00 PM.
#37
Re: How's a 572 ci gonna run?
JC's getting the 375hp with an XR. I have a builder who is taking my 375hp in trade for the 572ci. I'm waiting on prices for the Merc ITS. and the Imco stuff.
#39
Re: How's a 572 ci gonna run?
Here's my unconfirmed order. Just updated today with John and waiting on a response on some items.
Race hull construction
Custom 572ci 700 hp engine
Race engine mounts
XR drive
Eddie Marine Big Gun Muffler tips
Full hydrolic steering
Imco drive extension box 12"
Kplains
Duel batteries w/switch
Rear seat bar
Boat cover (light weight)
Cloth cabin cushions
Canopes in Toyota color 1D2 Thunder Cloud Metalic
Blue accents in seats
Autometer Pro Comp Ultralite gages (silver trim, white face)
GPS speedo
Dino urethane steering wheel (silver, polished center)
Cup holders, four in satin or polished
Porta potti compartment only.
Backrests and under seat storage in cabin along with cushions already ordered.
Prewired for two fans in cabin
Prewired for four speakers in cockpit sides and two under rear bench
Aluminum trailer
100MPH sunglasses
Race hull construction
Custom 572ci 700 hp engine
Race engine mounts
XR drive
Eddie Marine Big Gun Muffler tips
Full hydrolic steering
Imco drive extension box 12"
Kplains
Duel batteries w/switch
Rear seat bar
Boat cover (light weight)
Cloth cabin cushions
Canopes in Toyota color 1D2 Thunder Cloud Metalic
Blue accents in seats
Autometer Pro Comp Ultralite gages (silver trim, white face)
GPS speedo
Dino urethane steering wheel (silver, polished center)
Cup holders, four in satin or polished
Porta potti compartment only.
Backrests and under seat storage in cabin along with cushions already ordered.
Prewired for two fans in cabin
Prewired for four speakers in cockpit sides and two under rear bench
Aluminum trailer
100MPH sunglasses