heat exchanger closed cooling setup
#1
Registered
Thread Starter
Join Date: Jun 2009
Location: Dunmore, PA
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
heat exchanger closed cooling setup
Removed this from my 454 Mercruiser when I tidied up the engine bay and saw no need for it as runnig fresh water.
The end caps were removed for inspection an all is clean and in excellent shape.
I have the cooling tank, hose clamps and stainless steel "T" fittings I am including (see pics)
Also included is the Thermostat Housing that serves as a bracket to mount the Heat Exchanger.
Worked as it should with no issues, just wanted to replace and re-route the hoses and saw no need for it. Rather put the money in my boat budget at the time.
$400 Shipped
The end caps were removed for inspection an all is clean and in excellent shape.
I have the cooling tank, hose clamps and stainless steel "T" fittings I am including (see pics)
Also included is the Thermostat Housing that serves as a bracket to mount the Heat Exchanger.
Worked as it should with no issues, just wanted to replace and re-route the hoses and saw no need for it. Rather put the money in my boat budget at the time.
$400 Shipped
Last edited by aven2rus; 10-04-2012 at 09:23 AM.
#2
Registered
Thread Starter
Join Date: Jun 2009
Location: Dunmore, PA
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Took some better photos today you can see here
http://www.ebay.com/itm/320998987970...84.m1555.l2649
http://www.ebay.com/itm/320998987970...84.m1555.l2649