K&N air intake problems

Reply Subscribe

Thread Tools

08-24-2007, 06:30 AM

#11

THRILLSEEKER

Registered

Thread Starter

Join Date: Apr 2002

Posts: 4,215

Likes: 0

Received 0 Likes on 0 Posts

Quote:

Originally Posted by offshoredrillin

tighten the gas cap, take it off then re tighten it and see if that changes it. Sometimes changing the filter will shoot a lean condition to the comp, many times its the cap, wont allow pressure to build.

Tried that, no difference.

08-24-2007, 06:36 AM

#12

THRILLSEEKER

Registered

Thread Starter

Join Date: Apr 2002

Posts: 4,215

Likes: 0

Received 0 Likes on 0 Posts

Quote:

Originally Posted by Chris Sunkin

I don't know where you're getting your replacement but I'd go with OEM or NAPA. I've tried several from Auto Zone and Advance and went through several before getting a good one.

OEM Delphi, from parts bin.com $80 cheaper than the local dealer wants for it.

Its getting near impossible to find quality aftermarket parts, I buy the bulk of my parts from Napa. I will no longer use any of their re manned parts, I cant tell you how many out of the box junk starters/alternators/ master cylinders ect..ect..ive been thru. So I go to Autozone to buy a new Duralast starter for my last truck, starter lasted about 40k miles.

08-25-2007, 07:51 PM

#13

tommymonza

Registered

Join Date: Aug 2004

Location: naples,florida

Posts: 4,113

Likes: 1,390

Received 592 Likes on 241 Posts

Altenator went out last week on my truck. .Went to buy a new one from Autozone. They didn,t have a new one in stock so against my better judgement i took a remanufactured one.After 2 hours of installation it has a bearing whine that sounds like a jet.I could here it making a noise when i spun it before installing but i had to get up and running.Cheap Mexican built CRAP!