1980 30' Velocity - Redo in progress
#151
Registered
Thread Starter
Thanks Full Force. Hard to make any real progress at this point since boat is an hour away in Marblehead. I'll be there for a long weekend over xmas breat. Will try to at least get things unboxed and organized.
#153
Registered
Thread Starter
#155
Registered
Thread Starter
The alum is not super think but thick enough that it doesn't flex. Definitely not sheet metal. I don't know how to describe exactally. IF you were to hold a 4X8 sheet of it, it would be significantly thinner than a 1/4 plywood but would not flex in the middle.
The framing is a 1X2 box grid on the bottom side. Tig welded to top so it is all one piece. Very strong.
Good thing I kept with a somewhat retro look because it would definitely have gone through a few style cycles before I get it wet.
The framing is a 1X2 box grid on the bottom side. Tig welded to top so it is all one piece. Very strong.
Good thing I kept with a somewhat retro look because it would definitely have gone through a few style cycles before I get it wet.