Bottom pad pix
09-27-2008, 02:16 PM
#44
Registered
Join Date: Aug 2005
Location: Marietta, Ga.
Posts: 777
Likes: 0
Received 0 Likes
on
0 Posts
09-27-2008, 02:17 PM
#45
Crazy Energy
Platinum Member
iTrader: (4)
Join Date: Aug 2007
Location: Oklahoma God's country no one else wants it.
Posts: 4,334
Likes: 0
Received 1 Like
on
1 Post
Sorry BILL, the pad on 41' is 18.5" wide and goes approx. 13' turns into a V to the front. The 41' does get up on the PAD like the 22',26',30' and 39'. Curts single 32' gets up and stays on the pad easily. I"d like to see his boat with 900-1000 hp. It would brake a lot of hearts. BOB.
09-28-2008, 09:15 AM
#48
Registered
LOL
09-28-2008, 07:54 PM
#49
Vector, you never know until you try the combination. I think you are going to have your hands full,but you never know. Over 10 years ago STEVE STEPP talked me out of building a 32' #5s and blown 600 in motors. [QUOTE STEVE} build a 41' then you can use all the power you will ever want to put in it, and run safely. BOB
09-28-2008, 08:44 PM
#50
Registered
Vector, you never know until you try the combination. I think you are going to have your hands full,but you never know. Over 10 years ago STEVE STEPP talked me out of building a 32' #5s and blown 600 in motors. [QUOTE STEVE} build a 41' then you can use all the power you will ever want to put in it, and run safely. BOB
