|
Activator 32 Stealth ex. JC Perf.
4 Attachment(s)
Hi,
After a few years waiting I now own one of 5 Activator 32's :) I visit Jeff at L.I. in July and had the deal done the same day. Jeff Cropper is a great guy :) Boat came to Sweden last week and we spend some time going thru the boat with some service etc . Had her splashed sat. This boat is something else than any other boat I've been on!!! Mange |
Good Luck with her and kick some ass!!
|
Congrats!
|
How fast wide open?
|
Mange, have fun with hull #4. I have hull #3 (Slim Shady), they are great boats.
Paradise, his boat should do nearly 100MPH. |
Originally Posted by JCPERF
(Post 3491633)
Good Luck with her and kick some ass!!
We have some hardcore old guys here with a Batboat 28 dry sump #6 with a 800hp. The driver is 60 and co driver 75. It's gona be hard haha. Great guys with alot knowledge. Is it a hudraulic roller or a mechanic roller in the motor? What pistons and rods? Say hello to your better half from me :)
Originally Posted by Dave M
(Post 3491715)
Congrats!
Originally Posted by PARADISE ISLAND
(Post 3493183)
How fast wide open?
Originally Posted by SFOcean
(Post 3493575)
Mange, have fun with hull #4. I have hull #3 (Slim Shady), they are great boats.
Paradise, his boat should do nearly 100MPH. So, what spec do your motor have? Love "Slim Shady", thats a very cool boat! With cabin!! Mange |
3 Attachment(s)
I really love the character of the JC Performance 532"!
It's very strong all the way and actually don't got any peak before 6200rpm. It's a true race engine. We had the coast guard talking to us after last weekends tests. People called them and was scared. Kid's crying etc..... :D This 1095hp 572" engine is going in the Activator this winter. |
"So, what spec do your motor have? Love "Slim Shady", thats a very cool boat! With cabin!!"
Mange, The engine is a 555 BBC blown and intercooled. It is being completely redone and upgraded right now. Greg |
Originally Posted by Mange
(Post 3494122)
We had the coast guard talking to us after last weekends tests. People called them and was scared. Kid's crying etc..... :D
Hope i get time to splash the Magnum so i can see the Activator closeup on WOT saturday. Verry nice boat (tho it needs a "hat" ;) ) |
Originally Posted by Mange
(Post 3494118)
Thanks Jeff! I'll do that, or try. 10 of september we will race.
We have some hardcore old guys here with a Batboat 28 dry sump #6 with a 800hp. The driver is 60 and co driver 75. It's gona be hard haha. Great guys with alot knowledge. Is it a hudraulic roller or a mechanic roller in the motor? What pistons and rods? Say hello to your better half from me :) Thanks Dave!! This is the ultimate rig. SFOcean, you are right. Last sat we hit just over 98. This weekend we will have some more time in her. So, what spec do your motor have? Love "Slim Shady", thats a very cool boat! With cabin!! Mange |
You have one sick boat there Mange!! I have driven that boat with Jeff and she is a winner.. Enjoy have fun, and put big power in her.. She loves it!!!!!
|
Originally Posted by Titan
(Post 3494854)
You have one sick boat there Mange!! I have driven that boat with Jeff and she is a winner.. Enjoy have fun, and put big power in her.. She loves it!!!!!
Thanks Titan!! On flat she is little tricky but with good new oil in the steering it will works just fine. But in rough she's a killer WOW. Flyes just straigt and loooong haha. I really want to hear some more stories of your time with her. Take care Mange |
Two short vid's
http://www.youtube.com/watch?NR=1&v=8B7cyxFEGZQ http://www.youtube.com/watch?v=PRIlG7t0quA Mange |
1 Attachment(s)
The new engine and the old hardcore mill from JC Performance :)
|
How much power in the new motor?
|
Originally Posted by Mange
(Post 3510322)
Two short vid's
http://www.youtube.com/watch?NR=1&v=8B7cyxFEGZQ http://www.youtube.com/watch?v=PRIlG7t0quA Mange |
Really looking good Mange!
|
Originally Posted by Gladhe8er
(Post 3510451)
How much power in the new motor?
Originally Posted by kreed
(Post 3510665)
Really cool boat, and the engine sounds pretty mean too. Good Luck!
Originally Posted by Rage Powerboats
(Post 3510819)
Really looking good Mange!
//Mange |
Keep us informed on 29 Fountain project thanks:drink:
|
Look forward to seeing you Mange. Give us a call anytime.
|
Very Cool boat..........always loved the 32' Activator's with the single #6 set-up.
Jon |
Mange..... Clear your pm's
|
Originally Posted by slpcamaross97
(Post 3523288)
Mange..... Clear your pm's
|
Originally Posted by Mange
(Post 3523290)
Done .... :)
|
I am happy someone straight owns it now
|
2 Attachment(s)
Originally Posted by masher44
(Post 3561334)
I am happy someone straight owns it now
I'm a pig who fly straight most of the time haha. I really love this boat. It's little tricky to handle on dead flat, but now I know. Fresh and a good brand oil in the steering. I love it in rough water, it's sick!!! JC's 930hp engine was a very nice motor. Now I going with a 572ci. Here We just have the engine in to make the measurement for the new Stainless Marine exhaust. I'm also going to build all the fuel and cooling system before I take the engine out again. Mange |
Originally Posted by masher44
(Post 3561334)
I am happy someone straight owns it now
|
Mange, awesome boat! What size blower are you running? Who makes it?
|
1 Attachment(s)
A Slow process re-rig the boat. Waiting for some tail pipes etc .
Had the fuel surge tank and plumbing done ..... |
1 Attachment(s)
Now the new tail pipes are on the right place. Going to do the rims of carbon fiber.
|
1 Attachment(s)
Inside. The red silicone connentions are for a crossover unit. A custom made noise reduction system :D
The crossover unit will be of aluminium, a inner and outer pipe with welded ends. Going to go with the kompressor cooling water thru it. I have never done this kind before so we will see how it's coming out. |
4 Attachment(s)
Had some carbon exhaust rings done. Custom made and layup directly on the transom to get the right curve. Made a template of cardboard to get the correct shape.
|
2 Attachment(s)
I going to have the last finishing done later.
Went out pretty nice I think. |
Coming along nicely, looks good!
|
Originally Posted by SFOcean
(Post 3662359)
Coming along nicely, looks good!
1 step forward 2 steps back :D Would love to see a project thread with Slim Shady!! Mange |
2 Attachment(s)
The power steering pump central placed on front of the mid wall. I going electric pump from Mercury.
It's for the bigger Verado o/b engines. I'm very excited to see how it work together with the Speedmaster #6 steering. |
3 Attachment(s)
The rigging close to finish.
Now the boat having some vinyl wrap done. I got some wire/hose job left to do. |
2 Attachment(s)
Here she is. We are on the final stage of rigging :)
|
very nice as usual Mange. more pics when you can.
|
4 Attachment(s)
Originally Posted by tomcei
(Post 3738238)
very nice as usual Mange. more pics when you can.
It's close now! We had the race decor done yesterday. |
| All times are GMT -5. The time now is 03:10 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.