Thank you

How are you going to attach the seat belts? Was there a reason for the hatch to open from the rear or just in case you forgot your hatch pins ( which we all have done). Love the interior rigging and layout.

Good question...are you just swapping seats...poker/race?

Theres cutouts in the seats. The belts will be bolted seprate from seat. Hatch was hinged that way for ease or access to bildge

It might be easier on land but in the ocean might be a challenge if you need to get in there IMO.

Quick story, We were racing and broke with no water pressure. I opened the hatch to look for something simple. I knew it was a kinked inlet water hose in the gimbal, it has happened before. I jumped out of the boat and into the water to try and fix it. A helicopter shows up to see if we are ok. The helo rotor wash broke the lifting rams and slammed the hatch back into the water with only the hinges holding it. Guess where I was? At the back of the boat trying to fix something. In the end I got blasted in the head pretty good. Thank god I still had my helmet on. And no I was not able to free up the kinked hose and was towed in. Once on land it was the problem and took all of 10 seconds to fix. There is no moral to this story LOL.

Is there going to be some good non skid on that cut out section in front of the hatch?

That sound CRAZY

Yes it is in mold . Very heavy texture

were you able to incorporate a shock system into the seats?