History of 28 AT
12-09-2007 | 07:34 AM
#51
Registered
Joined: Mar 2002
Posts: 2,864
Likes: 252
From: Indy
Raylar is making an all aluminum 550hp smallblock. I think I read that a pair of these is equal in weight to a big block.
Did I mention that you would have 1100hps.
I first read about these when the 33 was coming out and thought it would be a great setup for it.
Did I mention that you would have 1100hps.
I first read about these when the 33 was coming out and thought it would be a great setup for it.
12-09-2007 | 08:02 AM
#52
Registered
Joined: Dec 2003
Posts: 1,024
Likes: 0
From: Raleigh,NC & 1000 Islands,NY
twin sb vs. bbc
That would push the 28 into the 90's!! When my motors get to 500hrs I plan to do something more than just uppers...but I bet those Raylar 550's cost big $$$. I considered just rebuilding the 350's & Procharging.
12-09-2007 | 01:44 PM
#54
Registered
Joined: Jan 2004
Posts: 2,777
Likes: 12
From: San Diego, California
Whats a Raylar LSM550 worth?
Our new LSM550"s are a "DEAL" for 10 good reasons!
Consider this:
1. They are hand built -"blueprinted" forged internal motors.
2. They are all aluminum -weigh less than 500lbs.
3. Closed cooled- with oversize oil cooling
5. Come stock with polished stainless headers
6. Have variable cam timing and run on 89 pump gas!
7. Make over 560 ft/lbs of torque
8. Can run in front of a BRAVO 1X drive all day long without the higher cost the Big Block drive of comparable power will need!
9. They will fit where two big blocks won't!
10. We are going into larger production where we should be able to keep the cost in the medium to high $20K range with 1 year warranties.
Price a HP525 for comparison.
Try doing that with a big block for that kind of cost.!
Consider this:
1. They are hand built -"blueprinted" forged internal motors.
2. They are all aluminum -weigh less than 500lbs.
3. Closed cooled- with oversize oil cooling
5. Come stock with polished stainless headers
6. Have variable cam timing and run on 89 pump gas!
7. Make over 560 ft/lbs of torque
8. Can run in front of a BRAVO 1X drive all day long without the higher cost the Big Block drive of comparable power will need!
9. They will fit where two big blocks won't!
10. We are going into larger production where we should be able to keep the cost in the medium to high $20K range with 1 year warranties.
Price a HP525 for comparison.
Try doing that with a big block for that kind of cost.!
12-09-2007 | 01:45 PM
#55
Registered
Joined: Dec 2003
Posts: 1,024
Likes: 0
From: Raleigh,NC & 1000 Islands,NY
12-09-2007 | 01:49 PM
#56
Registered
Joined: Dec 2003
Posts: 1,024
Likes: 0
From: Raleigh,NC & 1000 Islands,NY
Our new LSM550"s are a "DEAL" for 10 good reasons!
Consider this:
1. They are hand built -"blueprinted" forged internal motors.
2. They are all aluminum -weigh less than 500lbs.
3. Closed cooled- with oversize oil cooling
5. Come stock with polished stainless headers
6. Have variable cam timing and run on 89 pump gas!
7. Make over 560 ft/lbs of torque
8. Can run in front of a BRAVO 1X drive all day long without the higher cost the Big Block drive of comparable power will need!
9. They will fit where two big blocks won't!
10. We are going into larger production where we should be able to keep the cost in the medium to high $20K range with 1 year warranties.
Price a HP525 for comparison.
Try doing that with a big block for that kind of cost.!
Consider this:
1. They are hand built -"blueprinted" forged internal motors.
2. They are all aluminum -weigh less than 500lbs.
3. Closed cooled- with oversize oil cooling
5. Come stock with polished stainless headers
6. Have variable cam timing and run on 89 pump gas!
7. Make over 560 ft/lbs of torque
8. Can run in front of a BRAVO 1X drive all day long without the higher cost the Big Block drive of comparable power will need!
9. They will fit where two big blocks won't!
10. We are going into larger production where we should be able to keep the cost in the medium to high $20K range with 1 year warranties.
Price a HP525 for comparison.
Try doing that with a big block for that kind of cost.!
Wish I had the ca$h!
12-09-2007 | 04:48 PM
#58
VIP Member
Joined: Mar 2006
Posts: 3,203
Likes: 1
From: Aspen, CO
12-09-2007 | 05:22 PM
#59
Registered
Joined: Dec 2003
Posts: 1,024
Likes: 0
From: Raleigh,NC & 1000 Islands,NY
12-09-2007 | 11:48 PM
#60
Platinum Member
Joined: Jan 2001
Posts: 1,562
Likes: 0
From: so. WI
Our new LSM550"s are a "DEAL" for 10 good reasons!
Consider this:
1. They are hand built -"blueprinted" forged internal motors.
2. They are all aluminum -weigh less than 500lbs.
3. Closed cooled- with oversize oil cooling
5. Come stock with polished stainless headers
6. Have variable cam timing and run on 89 pump gas!
7. Make over 560 ft/lbs of torque
8. Can run in front of a BRAVO 1X drive all day long without the higher cost the Big Block drive of comparable power will need!
9. They will fit where two big blocks won't!
10. We are going into larger production where we should be able to keep the cost in the medium to high $20K range with 1 year warranties.
Price a HP525 for comparison.
Try doing that with a big block for that kind of cost.!
Consider this:
1. They are hand built -"blueprinted" forged internal motors.
2. They are all aluminum -weigh less than 500lbs.
3. Closed cooled- with oversize oil cooling
5. Come stock with polished stainless headers
6. Have variable cam timing and run on 89 pump gas!
7. Make over 560 ft/lbs of torque
8. Can run in front of a BRAVO 1X drive all day long without the higher cost the Big Block drive of comparable power will need!
9. They will fit where two big blocks won't!
10. We are going into larger production where we should be able to keep the cost in the medium to high $20K range with 1 year warranties.
Price a HP525 for comparison.
Try doing that with a big block for that kind of cost.!
A pair of those in a cover-girl cabin, poker run version of the 33AVH would make for a VERY interesting boat.......
.
