|
I like #1 or #3 however, I would swap the green and purple and make the green the primary. Then you change your interior pink to yellow and the interior will reflect your exterior accents.
Also, R Addiction is spot on....thin them out towards the front |
Shawn, I've learned a few things from Les:p
Good ideas with the color swap......we should go into business.:D |
Tap, I gotta go with #2 along with some modification. I'd like to see the colors thinned out as they go forward, and hug the rub rail a little closer before they start to fill up the side of the boat; i.e. beginning to take more shape somewhere under the fairing.
Its a white boat. White is good, but accenting it with color is more preferable than covering the white too much. |
#3 or you could buy my 32 AUDACITY:D
|
Tap, You are going to make it to the Jammin Run right?:cool-smiley-011:
|
#3 For me too. Looks Awesome.
|
I like #1 the best.
|
howabout hydraulic steering instead?
|
1 Attachment(s)
Afeter looking at it i am starting to like #1 so i made some changes for you:D
|
3 Attachment(s)
Originally Posted by R Addiction
(Post 2426855)
Tap, I'd try to thin the graphics out as they go forward.....it helps to make the boat look longer. Just my (and my interior design degreed wife) 2 cents!! I do like the colors:cool-smiley-011:
But, if it were my boat I would just remove the graphics and leave it white. Another idear..........I don't much care for the profile of the 28 AT or the 28 Apache the way the windshield is. BUT if you put a vinyl wrap over the top half of the windshield it gives the illusion of a lower windshield and IMO a better looking profile. Sorry these are all 28 apaches, but its all I've got. |
| All times are GMT -5. The time now is 02:56 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.