Offshoreonly.com - looking for rubrail for 32 active thunder

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Active Thunder (https://www.offshoreonly.com/forums/active-thunder-30/)

- - looking for rubrail for 32 active thunder (https://www.offshoreonly.com/forums/active-thunder/195597-looking-rubrail-32-active-thunder.html)

spilman

09-30-2008 05:59 AM

Quote:

Originally Posted by Griff (Post 2701257)

Thanks for the offer, but I don't need any. Mine is in good shape. I was just responding to original post.

Yeah, I realized that after I posted....I figured scopam would realize I was making the offer to him.

Scopam, you still need the rail?

Thunderstruck

09-30-2008 10:51 AM

I used rubrails.com and found an exact match. Probably need to do it again since it has been a while. The rubrails have to be shipped as freight due to their length so take that into account for planning and $$.

scopam

10-01-2008 07:25 PM

rub rail

thanks for the offer, I have not decided on exactly what im going to use. I did like the stainless insert look. Has anyone had any luck cleaning it with anything, About the only way I see with how hard it is will be to sand it out and try polishing it.

spilman

10-01-2008 08:06 PM

Quote:

Originally Posted by Thunderstruck (Post 2701771)

Actually, it is coiled into about 40" diameter...that is how Pat delivered it to me. I think Taco-Metal sent it straight though....hmmm, can't remember...either way it costs about $80 to ship.
BTW, the 20' piece I have is an exact match from AT.

Griff

10-02-2008 02:15 AM

I had a piece that I replaced on the Pantera that had been coiled for about 3 years. It was a beotch to get straightened out.

You can clean the rubrail with Acetone. Acetone will remove small scuffs and rub marks. Wax it after you're done.

All times are GMT -5. The time now is 12:54 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page