|
Each boat is a little different, on the 37 AT I had the slip was in the 20-23% and I then added a 1" spacer and took it down to 14% slip which in turn picked me a some mph and alot on cruise.
Your boat from the factory came with out spacers, so you will have to test and see what works best for you. Hope this helps. |
[QUOTE=laszlo01;2808018 Just want to get it right the first time and we are on fast track to get it done right the first time.[/QUOTE]
There is NO such thing as getting it right the first time with a boat!!! You have to spend a ton of money before you can get it right. LOL:ernaehrung004: |
Originally Posted by laszlo01
(Post 2808018)
No spacers and lab finish 32's ?or just plane stock 32's ? also spacers or no spacers ? Just want to get it right the first time and we are on fast track to get it done right the first time.
I'm running the identical set up on my 33 and I find it's the best overall. Steve |
Originally Posted by excursion
(Post 2807810)
Rick, one question, why are pulling the motors down in the boat?
Much easier to work on out of the boat. Trust me I have enough experience......... they are actualy easy to do in the boat and i did not have to pull the drives and hoist the motors out and then re alighn them. |
Ok will go with the no spacer lab 32 set up, sending props out to BBlades anyway and i used the labs on my powerquest and really liked the improvemnt, so will do the same here.
|
Originally Posted by ThunderChris
(Post 2807494)
You have a sweet boat Rick. I remember when you were out with Joe on St. Clair going for a test drive. I did talk to Julie at Throttle Up, and she had suggested adding a spacer to the drives to help bring down the slip since we have such a high X-dimension. Going to write her again and get a better understanding. When I spoke to her in Miami, I think I had to many beers and didnt comprehend everything she said. Did you do a comp test and leak down before you pulled them? Give me a call this wkend. Try and help you out the best I can.
Chris 248-259-8179 |
I was wondering on the nose cones, I put them on my Vyper and it really woke it up on the top end. Most likely just run the stock drives this season and see how it runs, gonna pull the motors next winter to see how they look and probably bump them up a bit to the 650 HP mark. Might consider nose cones at that point. Just wanted to see if I need the spacers or not, but looks like it is not a concern.
|
Originally Posted by laszlo01
(Post 2808233)
Ok will go with the no spacer lab 32 set up, sending props out to BBlades anyway and i used the labs on my powerquest and really liked the improvemnt, so will do the same here.
You might want to run em before spending all that coin to get them labbed. |
Activeshack has the same boat too...he runs a set of labbed 28P Maximus and loves the way they cruise. I run 32P Bravos or 15 5/8 28P Maximus on my Formula and have a set of cut down (15 1/8) 30P Maximus as extra props that also work well. Mark (Activeshack) is anxious to try these on his AT and they might be well suited for that hull. (we'll have to get them on Mark's boat to see how they work out)....they are for sale, just not sure what hulls are best for that diameter yet.
|
I am so sorry but who had the fastest AT around ??????
Besides the big power boats???? |
| All times are GMT -5. The time now is 01:52 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.