|
Originally Posted by ActiveThunder
(Post 3375126)
You actually listened to me? :drink:
|
Originally Posted by slboatdrinks
(Post 3375207)
No, I've stopped being amazed at that. :drink:
|
Originally Posted by OCDACTIVE
(Post 3375240)
I don't want to risk doing it incorrectly.. At least if you do it I have someone to blame.. LOL :drink: But there is always a handle in it for you.
|
Did somebody say HANDLE?!!!!:evilb::evilb::evilb:
|
On "the 32" toggles didn't work.
We put an inspection plate in and then used a threaded stainless back plate with aircraft locking nuts...done deal and survived the hurricane that did the boat in. in fact wwe did it to the fishboat also. The A.T. had the plate glassed in. Can't remember if glassed on fishboat. The A.T. also had the bases 5200 to the foor to make sure water didn't get in it again. |
Got the Toggles and going to head to Fastnall to get the bolts.. They say what size to buy to fit the toggles but the X factor is how thick is the floor? Basically what LENGTH Bolts should I get?
Anyone know how much space I will have between the floor and gas tank approximately? How thick is the floor? Thanks again! PS. Don't Worry.... Remedy is flying up for a couple days to take care of all the maintanence and teach me the ropes. |
Originally Posted by OCDACTIVE
(Post 3388760)
Got the Toggles and going to head to Fastnall to get the bolts.. They say what size to buy to fit the toggles but the X factor is how thick is the floor? Basically what LENGTH Bolts should I get?
Anyone know how much space I will have between the floor and gas tank approximately? How thick is the floor? Thanks again! PS. Don't Worry.... Remedy is flying up for a couple days to take care of all the maintanence and teach me the ropes. Steve |
Originally Posted by 509 SC
(Post 3389898)
Well it seems who ever owns Remedy has a large responsibility taking care of OCD :lolhit:! I'm glad my boat didn't come with any baggage :drink:.
Steve |
3/4" with glass on both sides so more like 1".
Originally Posted by OCDACTIVE
(Post 3388760)
Got the Toggles and going to head to Fastnall to get the bolts.. They say what size to buy to fit the toggles but the X factor is how thick is the floor? Basically what LENGTH Bolts should I get?
Anyone know how much space I will have between the floor and gas tank approximately? How thick is the floor? Thanks again! PS. Don't Worry.... Remedy is flying up for a couple days to take care of all the maintanence and teach me the ropes. |
Originally Posted by ActiveThunder
(Post 3390058)
3/4" with glass on both sides so more like 1".
|
| All times are GMT -5. The time now is 05:57 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.