bolster seat loose. please help.
#21
A.T. Cult Member #4
VIP Member
Thread Starter
Join Date: Sep 2005
Location: Fort Myers, FL
Posts: 1,249
Likes: 0
Received 0 Likes
on
0 Posts
#22
A.T. Cult Member #4
VIP Member
Thread Starter
Join Date: Sep 2005
Location: Fort Myers, FL
Posts: 1,249
Likes: 0
Received 0 Likes
on
0 Posts
I don't want to risk doing it incorrectly.. At least if you do it I have someone to blame.. LOL But there is always a handle in it for you.
__________________
www.sbonh.org
www.sbonh.org
#23
#25
chuckbeecher
Platinum Member
Join Date: Jun 2001
Location: Anywhere from the Laguna Madre to JAX and beyond
Posts: 1,259
Likes: 0
Received 0 Likes
on
0 Posts
On "the 32" toggles didn't work.
We put an inspection plate in and then used a threaded stainless back plate with aircraft locking nuts...done deal and survived the hurricane that did the boat in. in fact wwe did it to the fishboat also. The A.T. had the plate glassed in. Can't remember if glassed on fishboat. The A.T. also had the bases 5200 to the foor to make sure water didn't get in it again.
We put an inspection plate in and then used a threaded stainless back plate with aircraft locking nuts...done deal and survived the hurricane that did the boat in. in fact wwe did it to the fishboat also. The A.T. had the plate glassed in. Can't remember if glassed on fishboat. The A.T. also had the bases 5200 to the foor to make sure water didn't get in it again.
Last edited by chuckbeecher; 04-16-2011 at 08:09 AM.
#26
A.T. Cult Member #4
VIP Member
Thread Starter
Join Date: Sep 2005
Location: Fort Myers, FL
Posts: 1,249
Likes: 0
Received 0 Likes
on
0 Posts
Got the Toggles and going to head to Fastnall to get the bolts.. They say what size to buy to fit the toggles but the X factor is how thick is the floor? Basically what LENGTH Bolts should I get?
Anyone know how much space I will have between the floor and gas tank approximately?
How thick is the floor?
Thanks again!
PS. Don't Worry.... Remedy is flying up for a couple days to take care of all the maintanence and teach me the ropes.
Anyone know how much space I will have between the floor and gas tank approximately?
How thick is the floor?
Thanks again!
PS. Don't Worry.... Remedy is flying up for a couple days to take care of all the maintanence and teach me the ropes.
__________________
www.sbonh.org
www.sbonh.org
#27
Platinum Member
Platinum Member
Got the Toggles and going to head to Fastnall to get the bolts.. They say what size to buy to fit the toggles but the X factor is how thick is the floor? Basically what LENGTH Bolts should I get?
Anyone know how much space I will have between the floor and gas tank approximately?
How thick is the floor?
Thanks again!
PS. Don't Worry.... Remedy is flying up for a couple days to take care of all the maintanence and teach me the ropes.
Anyone know how much space I will have between the floor and gas tank approximately?
How thick is the floor?
Thanks again!
PS. Don't Worry.... Remedy is flying up for a couple days to take care of all the maintanence and teach me the ropes.
Steve
#28
A.T. Cult Member #4
VIP Member
Thread Starter
Join Date: Sep 2005
Location: Fort Myers, FL
Posts: 1,249
Likes: 0
Received 0 Likes
on
0 Posts
hey hey hey... I am bribing him with Rum, Steak, and Thunderwear....... Not a bad deal.
__________________
www.sbonh.org
www.sbonh.org
#29
Registered
3/4" with glass on both sides so more like 1".
Got the Toggles and going to head to Fastnall to get the bolts.. They say what size to buy to fit the toggles but the X factor is how thick is the floor? Basically what LENGTH Bolts should I get?
Anyone know how much space I will have between the floor and gas tank approximately?
How thick is the floor?
Thanks again!
PS. Don't Worry.... Remedy is flying up for a couple days to take care of all the maintanence and teach me the ropes.
Anyone know how much space I will have between the floor and gas tank approximately?
How thick is the floor?
Thanks again!
PS. Don't Worry.... Remedy is flying up for a couple days to take care of all the maintanence and teach me the ropes.