25 Tantum Switches, Update, and Other
06-25-2011, 06:28 AM
#1
Registered
Thread Starter
Join Date: Jan 2010
Location: Mansfield, Ohio
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
25 Tantum Switches, Update, and Other
Looking for some help identifying my panel switches, anyone know the model # and if they are available ? I have an inquiry into Carling awaiting a reply just an FYI.
Also, just a lil update, building done FINALLY cept the gutters. Court case against my initial contractor ugh, second crew been great, beware hiring friend, lesson learned !
Took the lil one to the lake for its maiden shakeout run, no issue whew what an adventure this has been for sure. Now working through trailer brake options/repairs, has a #6 Dico/Titan with single line back to axles but no hardware and kinda suspect the master cylinder bad due to being open and never used for some unknown period of time. Leaning toward discs vs drums, master cylinder bout the same bucks and a lil more at the wheels for discs but assuming they require a lil less maintenance, hoping seasonally, anyone weigh in on this one ? Fresh Water, Ohio Application.
Also, just a lil update, building done FINALLY cept the gutters. Court case against my initial contractor ugh, second crew been great, beware hiring friend, lesson learned !
Took the lil one to the lake for its maiden shakeout run, no issue whew what an adventure this has been for sure. Now working through trailer brake options/repairs, has a #6 Dico/Titan with single line back to axles but no hardware and kinda suspect the master cylinder bad due to being open and never used for some unknown period of time. Leaning toward discs vs drums, master cylinder bout the same bucks and a lil more at the wheels for discs but assuming they require a lil less maintenance, hoping seasonally, anyone weigh in on this one ? Fresh Water, Ohio Application.
06-25-2011, 07:29 AM
#2
Platinum Member
Platinum Member
07-02-2011, 09:46 AM
#4
Registered
Thread Starter
Join Date: Jan 2010
Location: Mansfield, Ohio
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Well after spending about a week with Livorsi Tech help and being advised that either my tab/flap switches aren't lighted or must lock down I'm in search of a new lead for my switches, any assistance would be greatly appreciated. Double Pole, Momentary, Lighted is what I'm looking for pics added.
Last edited by RedRider69; 07-02-2011 at 10:03 AM. Reason: missed pics
07-02-2011, 08:38 PM
#6
Registered
http://www.pacergroup.net/Categories...ckers_Switches
Sorry I didn't see your post earlier. Hope this helps.
Pat
Sorry I didn't see your post earlier. Hope this helps.
Pat
