Update to 32 Build (Pic Heavy)
#11
Thread Starter
Registered
Joined: Feb 2011
Posts: 388
Likes: 0
From: Tiline, KY
#13
Registered
Joined: Sep 2012
Posts: 27
Likes: 0
From: Southaven, MS
#14
Thread Starter
Registered
Joined: Feb 2011
Posts: 388
Likes: 0
From: Tiline, KY
Don't wanna step on tfarmer, but I want to say they were 950hp a side at 4 PSI boost? I drove that boat a few times and then he let me open it up once. Ive never been on anything faster in my life, 110 easy no problem. Don't ask me how the bravo one drives held up. Everyone calls bullchit when we tell them he used stock B1 drives. But he didn't murder them out of the hole either. The blowers didn't have any surge at all so that helped with the drives at idle when going in and out of gear. Maybe that Amsoil Synthetic helps. He keeps preaching for me to use it.
#15
Registered
Joined: Sep 2012
Posts: 27
Likes: 0
From: Southaven, MS
Don't wanna step on tfarmer, but I want to say they were 950hp a side at 4 PSI boost? I drove that boat a few times and then he let me open it up once. Ive never been on anything faster in my life, 110 easy no problem. Don't ask me how the bravo one drives held up. Everyone calls bullchit when we tell them he used stock B1 drives. But he didn't murder them out of the hole either. The blowers didn't have any surge at all so that helped with the drives at idle when going in and out of gear. Maybe that Amsoil Synthetic helps. He keeps preaching for me to use it.
#16
Thread Starter
Registered
Joined: Feb 2011
Posts: 388
Likes: 0
From: Tiline, KY
Boat handled like it was on rails. Stuck to the water with those 30p bravo ones. It has always felt solid and never loose. You cant go wrong with AT. And the yellow one, Id grab that dude. The 32's are soooooo hard to find.
#17
Registered
Joined: Jan 2011
Posts: 3,066
Likes: 8
From: Ocala, Fl
I stumbled on this thread by accident. I thought me and my crazy brother were the only crazy people left in this world!!!
Congrats...sounds great and ...very impressive.
You have to be hard core to get the most out of life and you definitely are!!
Congrats...sounds great and ...very impressive.
You have to be hard core to get the most out of life and you definitely are!!
#18
Thread Starter
Registered
Joined: Feb 2011
Posts: 388
Likes: 0
From: Tiline, KY
#19
Yes they were 950 hp. I think I set the boos at 6 lb. I had the pulleys set up for a 15lb if you flip them. I never did it had more power than you could ever use. And yes 3 digit speeds any time all day long. I'm gonna hold off on building the engine for the outlaw Camaro for now.
My 37 better watch out I'm getting tichy!
My 37 better watch out I'm getting tichy!






yeah i bet that took a little while longer to get those monsters in there! how much HP each and what speeds did you see with that set up?
