Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Active Thunder (https://www.offshoreonly.com/forums/active-thunder-30/)
-   -   24 ft thunder (https://www.offshoreonly.com/forums/active-thunder/297856-24-ft-thunder.html)

smokem68 06-09-2013 06:50 PM

24 ft thunder
 
1993 24 ft thunder. Does anyone have any info weight ect.. on this hull? own one and was curious, I think its the same mold as a 25 tantrum. the boat Is great no creeks rattles absolutely love the boat no complaints. Looking at going to -2 imco anyone done this. The prop shaft is deep at 8 inches. Motor should be around 650 to 675 hp this year want to make it to the 80s is this possible?

1980Condor460 06-10-2013 10:50 AM

How about some pics???

smokem68 06-10-2013 12:48 PM

I have to learn how first I will try later.

ActiveThunder 06-10-2013 05:01 PM

24 is the 25 Tantrum. Same molds. Great boat!! If you need any help setting it up please drop me an e-mail or call.

Pat

25AT500EFI 07-09-2013 01:49 PM

That should be very obtainable with that power. I run 80 gps. with a 500EFI (585hp) with a Bravo 28 (BBlades) with my 00' 25 AT. Good luck!

smokem68 07-09-2013 07:18 PM

We will find out hopefully Thurs I am running a -2 shorty to see what happens my prop shaft will now be 4.5 below.

My Addiction 07-09-2013 09:08 PM

what Prop will you be spinning?

Am I missing something? Standard prop depth 8". -2 shorty new prop depth 4.5"... Did you change something else?

smokem68 07-10-2013 01:05 PM

Let me measure again but no I have changed nothing I was almost positive I was at 6.5 before the Shorty ill check this afternoon

My Addiction 07-10-2013 10:57 PM

what prop?

smokem68 07-13-2013 10:47 AM

well I measured again but I trim the drive to level the nosecone will hit the trailer. Im guessing u were right My Addiction because I was at like 4 3/4 and was not level. For the prop I was going to start with a bravo 25. Had Idle issues and didn't want to waste Mr. Youngs time as he was just finishing a previous tune. He gave me great advise on getting the motor straight! So in other words I need to try again. If you have any suggestions Im more than willing to listen.


All times are GMT -5. The time now is 03:39 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.