|
We are going to use the 22 mold we have designed and built with the patented DDC hull. However the deck will be a smaller version of the big boats. You get three power options: outboards, outboards or out boards.....
|
Outboards... plural? As in a pair of 300 XS's?
|
Actually the 31 CC was, in fact, dammed right at the transom to create the original 28. This was in 1999. The 31 included the 'engine bracket/ swim platform' in it's LOA.
In 2004 we decided to pull a part from the AT 32 V-bottom mold so from then on it was a different bottom. You could say we dammed it. The interesting part was that the lifting strakes actually worked a little better than the original '28/31' mold since we didn't touch the lifting strakes. The 29 will be a new mold with the DDC patented hull. If you tried to dam the 28 ,old you would have incredibly unproportional hull sides.
Originally Posted by Crossett
(Post 4054108)
From the man himself
http://www.offshoreonly.com/forums/a...ml#post1954419 So the 31 CC was blocked down to create the original 28, and the 32 was blocked down to create the revised 28. But I am wrong in assuming that you could make a 22 by blocking down the 28? |
Interesting idea! That would be a white knuckle ride!
Originally Posted by Crossett
(Post 4054114)
Outboards... plural? As in a pair of 300 XS's?
|
That second video is hilarious. Anybody got an old mold and a dam?
|
Originally Posted by ActiveThunder
(Post 4054117)
Actually the 31 CC was, in fact, dammed right at the transom to create the original 28. This was in 1999. The 31 included the 'engine bracket/ swim platform' in it's LOA.
|
Originally Posted by Sydwayz
(Post 4054071)
Testing and tuning by some using the chuck a dam anywhere in the mold technique:
http://www.youtube.com/watch?v=ygB3mjP5N7g |
Originally Posted by drivrswntd
(Post 4054135)
Any idea where the first 28 is at now? I am guessing by my hull ID that I may have the 2nd 28 that you guys produced. ATD28V02
|
And, yes, that would be you!
Originally Posted by abmotorman
(Post 4054240)
if that's the case that would be me ATD28VO1... Wisconsin.
|
Originally Posted by ActiveThunder
(Post 4054109)
We are going to use the 22 mold we have designed and built with the patented DDC hull. However the deck will be a smaller version of the big boats. You get three power options: outboards, outboards or out boards.....
|
| All times are GMT -5. The time now is 03:01 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.