|
Originally Posted by donzi matt
(Post 4401037)
Doh! Just looked through the new posts tab and jumped on in.
It's like a cult in here. Weird. |
The biggest project we have this winter is finding time to get back to Florida so we can use the boat. Why does work always have to get in the way?
|
The first Savage made is getting new vinyl and foam on the walls in the cabin and Scorpion full roller rockers. (should have done these when I did my engines 2 years ago). Planning on upgrading gauges and switches next year. That is if a new to me 37 doesn't find me first. I WILL be seriously looking next summer (2017) after selling my other home.
Good thread Mike, I always pay attention to these especially in the AT thread. AB |
Originally Posted by easyrider1340
(Post 4400741)
Whos doing your drives?
Originally Posted by Wally
(Post 4400762)
Hey Mike, you have any experience with Cryoing any tooling? I have had cryo'd disk brakes on my old dually and i thought it made a HUGE difference for me for towing/stopping power when using carbon brake pads......but we have been thinking of doing some tooling here at work (carbide cutters and other stuff for the CNC machines) and just wondering if you had any luck with that?
|
On my 37
-complete repaint -trim and tab cables -removal of the clamshell trim cable holders and installing merc style -stainless fittings on the tabs to eliminate the faded plastic ones that hold the cables -changing the garboard plugs to standard issue so I don't have to,deal with the oring on factory ones -throttle bezel -another pair of JL 8.8s -bass knob to turn up or down the subwoofers -removal of the side rails along the cockpit -billet bilge blower vent covers -billet side vent covers -new windshield -repair bow light cup so it drains properly -install mini pin cleats for fenders -new vinyl rigid rub rail -new transom shower cup -removal of one grab handle on dash -new innotech panels -Imco SCX drives Debating on a new chartplotter and gauge bezels. That is it I think. |
Originally Posted by Pwraddr
(Post 4401856)
That is it I think.
|
Originally Posted by boatfreak
(Post 4401860)
You think?:eek:
Also need to reassemble the whole boat. De rigged everything for paint. Only thing I didn't remove was the transom assemblies. Will I see ya at Boyne, Mike? |
Originally Posted by Pwraddr
(Post 4401864)
;)
Also need to reassemble the whole boat. De rigged everything for paint. Only thing I didn't remove was the transom assemblies. Will I see ya at Boyne, Mike? |
[QUOTE=sommerfliesby;4401645]All-American Drive Service in Michigan
Hear many great things about AADS, Gonna take mine there except they are very busy! that must mean something |
i have a pattern for the windscreen. Had a new one made cracked the first one out of plex changed 2nd to lexan just before I cut Over Active loose. There is one made over at PBC in the Ozarks if you can get it from them
|
| All times are GMT -5. The time now is 06:12 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.