Mechanic and surveyor
 

Hey guys , in need of help. Anyone know of a marine mechanic and or a surveyor in the Williamsport area of Pennsylvania , or a member that checks motors and drives. I found a boat in Pennsylvania that I really like, but won't buy it without having it checked out. I don't know anything about mechanics. Any help would be appreciated.

1) Have you checked here?
http://www.marinesurvey.org/find-a-s...full-list.html

2) I know of a guy who I would trust implicitly in Virginia (on the above list), but he doesn't really travel that far. You would have to cover his travel.
Kimball Marine Services
Thomas R. Kimball, AMS® Specialty:Y&SC (13.4 mi)
4316 Charity Neck Road Virginia Beach VA 23457
757-621-0750-Cell

3) You could always fly in Ed Cozzi, who has done so for more than a few OSO members in the past.
http://www.performancemarinesurveyor...-ED-COZZI.html

If you are going to fly anyone in and pay for car and a full check out I possible could tackle this depending on timeframe. I was up in Philly a couple of months checking out a boat as well.

I would need to know the app(s) of all and possible serial numbers - engines / drives and transom assemblies as I can look up all warranty and or recall info original owner and were it was bought and what boat all these were installed in on top of. I have all the scan tools and all the OEM manuals of everything to aid in any form of an inspection. Just throwing it out there.

Forgot to add - I also have free flights around the world with that said If the loads from DFW to PA the closest airport look lite I do not charge for flights. I have to fly stand by for the free flights so it can be a gamble. If they are almost to fully loaded I require a bought flight(s) and of course I can get deals on cheaper paying flights. The free flights have to be an airport that American or old US Air flies into.

Can you believe it, I finally find a mechanic and a surveyor to look at the boat in PA. and the river is too low to launch the boat to do a sea trial. Ugh!! Just venting.