anyone have pictures of their engine rigging/placement. i was instructed to move mine forward and would like to get some ideas on "cleaning" up the intallation at the same time. thanks.

if I could figure out how to attach a picture I would show you my setup with engines 12 inches forward

right below the area where you type in your post is the "additional options" area. click on "manage attatchments" and then it will search your pic's.

here they are. remenber I have 12 inch imco extension boxes.

must be doing something right.... single carb, blower, intercooler, boxes, tunnel tab,.... 134 what ??????....maybe post a speedo pic too.

Don

huh? that boat runs 134 with single carb small blowers???? wow! what props drives etc?
hell, i can run a blistering 4mph right now

B max drives with 1.19 gear ratio. labed 34 pitch bravo 1 props. tunnel tab. GGB mufflers.
can run 134 @ 5800 rpm easily in 70 degree weather in distance of 1.25 miles from idle to chopping throttles.

they make look small... but kinda like a wolf in sheeps clothing...

Don

thanks guest looks great on the water! gives me some hope for this boat yet.what style tab did you go with and perhaps do you have pix of that?
also do you have pix of the driveshaft and back of the engines?
im sorry to be a pain just cant believe how hard it is to come up with a.o. info.don and ed have been great but im looking for owners input as well. hell with my daytona it was easy with so many of them out here but im out on my own with this thing.it's an a.o. thing i just dont understand

the pics i posted of the tunnel tab in the other post was of quests boat.

Don