Engine Hatch
 

Im trying to hunt down and find an engine hatch with white interior for a AO 2600. Anything or infor helps. Thanks

do you have a hatch and need the padding? Or are you missing everything? I have a guy building a hatch for a 31 and a 26, pretty cheap.

Can u get any pics of the hatch for the 26? and what do u call cheap?

What type of hatch is he building? Been wanting to lighten up that hatch for some time.

for the 3100 its a honeycomb panel wrapped in glass with two scoops. for the 26 he has a mold so it can be layed up pretty light. No pictures yet, but I will take some as soon as he has one of them done. He is doing the 3100 first, no more wood or padding on mine, raising it 4'' so the top will be even with the top of the headrest. He guessed it would weigh in at 60-70lbs. I have no idea what a stock one weighs, but mine was still wet and my boat has been inside for the last six months. He is also going to reinforce the hinge area so it can be through bolted. I will keep yall updated

Through bolt hinge is a good idea and that is huge weight savings over stock. Would love to know more.

i would like to know more about the hacth for the 26 and pic when ever u can thanks

Anyone heard of anything lately?

I should know something tomorrow

Roger that, any estimates or pictures yet?

It will be finished tomorrow, I have a couple camera phone pics I can send you. Just email me at [email protected]

any pics of the 26 hacth?

no pics of the 26 hatch yet, the 31 hatch weighs in at 62 lbs so far. Still need to paint it and put the head rests back on. I can stand on it and it doesn't flex at all. The mold we have is for a nsx, dont the 2600's have the seats built into the hatch?

i have an nsx and the headrests are made on the hacth

we are laying up a hatch for a nsx this week Ill keep you posted.

ooo-rah! thanks

awsome thanks

Just got the call, NSX hatch weighed in at 43LBS!!!

any pics yet? and can it be cut out for a blower to stick through?

I'll take some pics in the am, yes it can be cut for a blower. This one is still uncut, and has not been painted yet its just white gel. Whats your email I'll send you a pic if you like.

Thanks send them to [email protected]

NSX hatch
 

Im interested also.... [email protected]

Hey rotti, any pics yet? or any info?

Any pics yet?

Ok just emailed some pics, sorry it took so long. If you want more just let me know

Ill take some pics please, thanks rotti

whats your email?

Pics of hatch
 

Can I see your pics? send to
[email protected]

thanks

Ray

info
 

Would you email me some info and pics on the hatch for the NSX please and thanks very much.

[email protected]

sorry it took so long, here are some pics of the 3100 hatch

Do you have a mold for the 2600? (rear hatch/bench combo?) Or know of anyone that does? Thanks!:D

no just the NSX

If you guy's need a custom hatch made for your boat let me know. We built Rotti's. Brian 770-560-3747

Here are a few of the hatch with the head rest back on. Brian, when will you be ready to fill the notches on my Spectre?

Brian, would you consider making the same engine cover without the twin raised hatches?