wanted to thank ed
#12
Registered
Joined: Nov 2002
Posts: 654
Likes: 0
From: Champaign, IL
yes .... the port side door opens into a small room... big enough to change or put a port o potti ... i use it like a locker most of the time. though.....
the drives are sportmasters on ITS boxes... the propshaft is maybe 1/2" below the bottom of the boat... Ed, put the x 1" higher than the way he built them due to the box...
Don
the drives are sportmasters on ITS boxes... the propshaft is maybe 1/2" below the bottom of the boat... Ed, put the x 1" higher than the way he built them due to the box...
Don
#14
Registered
Joined: Nov 2002
Posts: 654
Likes: 0
From: Champaign, IL
Thanks.. we like it very much.
well ... i'm not sure about the height ... but i come out of the hole very strong... good accelleration... and on little STOCK 496 mags... i run low 90's GPS and they're still new ( less than 20 hours )
Don
well ... i'm not sure about the height ... but i come out of the hole very strong... good accelleration... and on little STOCK 496 mags... i run low 90's GPS and they're still new ( less than 20 hours )
Don
#18
Registered
Joined: Dec 2001
Posts: 38
Likes: 0
From: Southeast Texas
Wayne Hennis makes the seats for AO he has been doing it from the get go untill Steve changed to someone else!!! Since then Wayne has been making interiors for Marine Tech Cat's and we feel so lucky to have him making ours again!!!!!




