Houston we have a problem over !!!!!
#111
Charter Member #232
Charter Member
#113
Banned
Join Date: Sep 2001
Location: Deland, Florida
Posts: 25,191
Likes: 0
Received 0 Likes
on
0 Posts
Re: Houston we have a problem over !!!!!
#114
Registered
Thread Starter
Join Date: Aug 2001
Location: Boynton Beach FLORIDA!!!!
Posts: 1,842
Likes: 0
Received 0 Likes
on
0 Posts
Re: Houston we have a problem over !!!!!
yeah me over revving the thing when it started to load up
When that red needle goes into the red and reads 7000 THATS BAD
I need to put rev limiters on these things and this wont happen again.
Has the MSD I think its just a chip you slip in the thing to limit it if I remember correctly.
And yeah those are just shadows you see in that pic.
Lucky, Yeah I think you are right, Time to just haul it down to Herb and let him have at it.
When that red needle goes into the red and reads 7000 THATS BAD
I need to put rev limiters on these things and this wont happen again.
Has the MSD I think its just a chip you slip in the thing to limit it if I remember correctly.
And yeah those are just shadows you see in that pic.
Lucky, Yeah I think you are right, Time to just haul it down to Herb and let him have at it.
#115
Geronimo36
Gold Member
Re: Houston we have a problem over !!!!!
I'm sure you'll sleep better at night knowing it's fixed. Well at least I would...
If my boat was down for a couple months up here in NJ we would loose the entire season. I guess things are different down in Florida.
If my boat was down for a couple months up here in NJ we would loose the entire season. I guess things are different down in Florida.
#116
Registered
Join Date: Jul 2005
Location: Colts Neck,NJ
Posts: 2,149
Likes: 0
Received 0 Likes
on
0 Posts
Re: Houston we have a problem over !!!!!
#117
Geronimo36
Gold Member
#118
VIP Member
VIP Member
yeah me over revving the thing when it started to load up
When that red needle goes into the red and reads 7000 THATS BAD
I need to put rev limiters on these things and this wont happen again.
Has the MSD I think its just a chip you slip in the thing to limit it if I remember correctly.
And yeah those are just shadows you see in that pic.
Lucky, Yeah I think you are right, Time to just haul it down to Herb and let him have at it.
When that red needle goes into the red and reads 7000 THATS BAD
I need to put rev limiters on these things and this wont happen again.
Has the MSD I think its just a chip you slip in the thing to limit it if I remember correctly.
And yeah those are just shadows you see in that pic.
Lucky, Yeah I think you are right, Time to just haul it down to Herb and let him have at it.
Is it fixed yet??????????
__________________
Happily retired and living in Heavens waiting room.
Happily retired and living in Heavens waiting room.
#119
Registered
Thread Starter
Join Date: Aug 2001
Location: Boynton Beach FLORIDA!!!!
Posts: 1,842
Likes: 0
Received 0 Likes
on
0 Posts
not yet, having another engine built at MESA Balancing at the moment so this is sitting for now. I am also trying to finish my house stuff and then bring the boat home for the weekend and pull the engine apart and fish those lifters out of the valley. She needs a bath real bad too, she is DIRTY!
#120
Registered
Join Date: Apr 2004
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Jay check the lifter bore carefully. Lot of time if the lifter busted in the bore it will score up the lifter bore and it will have to be bushed. I'd still want to know what kind of heads are on that think. Do you have a picture of the rockers on the hear that would help.
We use to run a 525 inch KB olds with Dart big cheif heads and had a lot of trouble braking rocker arms and lifters. It used an offset lifter and it would split down the side near the offset.. The problem with it ended up being the head.
We use to run a 525 inch KB olds with Dart big cheif heads and had a lot of trouble braking rocker arms and lifters. It used an offset lifter and it would split down the side near the offset.. The problem with it ended up being the head.