Go Back  Offshoreonly.com > Owners Forum > Apache
Apache 28 Brave  Update! >

Apache 28 Brave Update!

Notices

Apache 28 Brave Update!

Thread Tools
 
Old 01-24-2008 | 06:42 PM
  #91  
Registered
 
Joined: Jun 2006
Posts: 14,914
Likes: 1
From: Lake Conroe, TX.
Default

You could put this on for under 20k and be the coolest apache brave ever conceived.

I talked to Rick and he has a standoff box for this.

http://www.offshoreonlyclassifieds.c...o20805-en.html

I would leave the Bravos alone. Even if you broke 5 of them in 5 years it would be cheaper than doing the conversion and the odds are not that good that you will break one anyway.
jeff1000man is offline  
Reply
Old 01-24-2008 | 06:50 PM
  #92  
Registered
15 Year Member
 
Joined: Jan 2007
Posts: 6,486
Likes: 361
From: Mansfield, TX
Default

While were talking about outdrives........ What do you think about putting on a pair of arneson surface drives and a pair of 400hp small blocks?

Expenses and age of boat set aside.
TexomaPowerboater is offline  
Reply
Old 01-24-2008 | 06:53 PM
  #93  
Registered
 
Joined: Jun 2006
Posts: 14,914
Likes: 1
From: Lake Conroe, TX.
Default

Originally Posted by TexomaPowerboater
While were talking about outdrives........ What do you think about putting on a pair of arneson surface drives and a pair of 400hp small blocks?

Expenses and age of boat set aside.
I think you are still going to be underpowered, but the arnesons would be awesome.

I would put the arnesons and then put some 900hp BB's in it.

I bet it would get a little sqirrely around90ish

There used to have a 30 sutphen down here with arnesons and 350hp small blocks that was almost 80.
jeff1000man is offline  
Reply
Old 01-24-2008 | 07:51 PM
  #94  
LAKESIDE RESTORATIONS's Avatar
Lakeside Restorations.com
 
Joined: Nov 2003
Posts: 2,512
Likes: 2
From: NorthEastern, PA
Default

The Apache we did the conversion on was a 33' warrior. Panther is right it was a Trs to 540 Hp conversion. The shorter x dimension worked great with a set of 4 blades. It did get it some more top end mph.. It ran a solid 80 afer the conversion with blown 509's.. Last year he upped the engines & I was told he was running in the 90's.. Also yes as mentioned earlier by panther & I a bravo to 540 would require a box & trannys.. Therefore the ace set up would be the way to go if it were to get done.. Jamie / Lakeside

.
__________________
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
LAKESIDE RESTORATIONS is offline  
Reply
Old 01-24-2008 | 08:09 PM
  #95  
Steve_H
Guest
 
Posts: n/a
Default

there will be another drive option in the near future. i heard illmor is developing a new drive that can handle 700+ hp. supposed to be a year away from release.....

but again there is no "economical" reason to change from bravos on a 28 apache imo.
 
Reply
Old 01-24-2008 | 09:16 PM
  #96  
Stormrider's Avatar
JC Performance Engines
20 Year Member
Gold Member
 
Joined: Jul 2002
Posts: 8,904
Likes: 34
From: Long Island, NY
Default

Konrad ACE is much more than 10k per side.
Standard 540 w/ gimbal is in the 12 range, plus install.

If ya really wanted to end up spending big bucks on a 28apache, the right way would be to buy Riggs' and throw merc 700s+NXT... new boat and new power.
Stormrider is offline  
Reply
Old 01-24-2008 | 09:17 PM
  #97  
Stormrider's Avatar
JC Performance Engines
20 Year Member
Gold Member
 
Joined: Jul 2002
Posts: 8,904
Likes: 34
From: Long Island, NY
Default

Jamie, i'm guessing your avatar is not the MRS?
Stormrider is offline  
Reply
Old 01-25-2008 | 07:24 AM
  #98  
Registered User
 
Joined: Oct 2003
Posts: 9,495
Likes: 6
Default

Originally Posted by Steve_H
there will be another drive option in the near future. i heard illmor is developing a new drive that can handle 700+ hp. supposed to be a year away from release.....

.
The Weismann?
Chris Sunkin is offline  
Reply
Old 01-25-2008 | 07:27 AM
  #99  
Registered User
 
Joined: Oct 2003
Posts: 9,495
Likes: 6
Default

Originally Posted by Stormrider
Konrad ACE is much more than 10k per side.
Standard 540 w/ gimbal is in the 12 range, plus install.

If ya really wanted to end up spending big bucks on a 28apache, the right way would be to buy Riggs' and throw merc 700s+NXT... new boat and new power.
Yes, Ace is certainly more than the 540 but "list price" and "street price" are two different things.

Mel has had that boat for some time. He doesn't even seem to want to discuss parting with it. That would be one hell of a combination though. How about in 3-man/staggered?
Chris Sunkin is offline  
Reply
Old 01-25-2008 | 11:48 AM
  #100  
lucy's Avatar
Registered
 
Joined: Feb 2003
Posts: 1,359
Likes: 4
From: Miami, FL
Smile

3-man staggered! that's the ticket!!
lucy is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.