Thinking of selling the CC...
#1
Registered
Thread Starter
Join Date: May 2007
Location: The Burg, FL
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Thinking of selling the CC...
I might have to let this go to free up some money. I have to figure out how to post pics which I will try and do tonight.
Quick details...
1996 28' Apache/Unlimited Powerboats Center Console. This boat was built by Eric Froberg off the 28 Brave mold. I don't recall how many are left but I would guess under 10.
HIN is UPI28011E596
Twin 250 EFI Mercs '97. One was just fully rebuilt with about 40 hours and the other has about 400 hours. All Gaffrig gauges. Kept under Full cover.
Only minor problem with the boat is that it has a few soft spots in the floor behind the console and on the front deck. I talked with Eric and he said that the stingers are sealed so no worries with that.
I had an estimate for pretty much a whole new floor for about $3,500.
Besides that I have had her to just over 71mph. Awsome boat and everyone wants to come up and talk about it.
Origianlly bought at Gov't auction in Miami. Once you get the floors up you might find something worth while...hahaha
I will try and get some pics up tonight...
Quick details...
1996 28' Apache/Unlimited Powerboats Center Console. This boat was built by Eric Froberg off the 28 Brave mold. I don't recall how many are left but I would guess under 10.
HIN is UPI28011E596
Twin 250 EFI Mercs '97. One was just fully rebuilt with about 40 hours and the other has about 400 hours. All Gaffrig gauges. Kept under Full cover.
Only minor problem with the boat is that it has a few soft spots in the floor behind the console and on the front deck. I talked with Eric and he said that the stingers are sealed so no worries with that.
I had an estimate for pretty much a whole new floor for about $3,500.
Besides that I have had her to just over 71mph. Awsome boat and everyone wants to come up and talk about it.
Origianlly bought at Gov't auction in Miami. Once you get the floors up you might find something worth while...hahaha
I will try and get some pics up tonight...
Last edited by PrzwoH2O; 08-14-2008 at 06:38 PM.
#2
Platinum Member
Platinum Member
I might have to let this go to free up some money. I have to figure out how to post pics which I will try and do tonight.
Quick details...
1996 28' Apache/Unlimited Powerboats Center Console. This boat was built by Eric Froberg off the 28 Brave mold. I don't recall how many are left but I would guess under 10.
HIN is UPI28011E596
Twin 250 EFI Mercs '97. One was just fully rebuilt with about 40 hours and the other has about 400 hours. All Gaffrig gauges. Kept under Full cover.
Only minor problem with the boat is that it has a few soft spots in the floor behind the console and on the front deck. I talked with Eric and he said that the stingers are sealed so no worries with that.
I had an estimate for pretty much a whole new floor for about $3,500.
Besides that I have had her to just over 71mph. Awsome boat and everyone wants to come up and talk about it.
Origianlly bought at Gov't auction in Miami. Once you get the floors up you might find something worth while...hahaha
I will try and get some pics up tonight...
Quick details...
1996 28' Apache/Unlimited Powerboats Center Console. This boat was built by Eric Froberg off the 28 Brave mold. I don't recall how many are left but I would guess under 10.
HIN is UPI28011E596
Twin 250 EFI Mercs '97. One was just fully rebuilt with about 40 hours and the other has about 400 hours. All Gaffrig gauges. Kept under Full cover.
Only minor problem with the boat is that it has a few soft spots in the floor behind the console and on the front deck. I talked with Eric and he said that the stingers are sealed so no worries with that.
I had an estimate for pretty much a whole new floor for about $3,500.
Besides that I have had her to just over 71mph. Awsome boat and everyone wants to come up and talk about it.
Origianlly bought at Gov't auction in Miami. Once you get the floors up you might find something worth while...hahaha
I will try and get some pics up tonight...
#4
Registered
Thread Starter
Join Date: May 2007
Location: The Burg, FL
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
I have the pics in my email but can't get them to download on my computer so I can post.
Can I email them to someone and post them for me?
Please Help!!
Justin
Can I email them to someone and post them for me?
Please Help!!
Justin
#8
Registered
Thread Starter
Join Date: May 2007
Location: The Burg, FL
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
One More...
These pics are about 6 months old. New Apache decals have been put on in place of the old ones on the sides. Also you can see a little mildew on the front seat. That has all been cleaned.
I will try and get some more recent ones. Maybe try and get a few of it in the water.
Let me know what you guys think...
These pics are about 6 months old. New Apache decals have been put on in place of the old ones on the sides. Also you can see a little mildew on the front seat. That has all been cleaned.
I will try and get some more recent ones. Maybe try and get a few of it in the water.
Let me know what you guys think...
Last edited by SpeedGirl; 10-30-2009 at 03:09 PM.