Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Apache (https://www.offshoreonly.com/forums/apache-55/)
-   -   Hammerhead?? (https://www.offshoreonly.com/forums/apache/216120-hammerhead.html)

sean stinson 09-25-2009 07:50 PM


Originally Posted by rbr2328 (Post 2954407)
Transom?

lets not go over this again.....early Apaches have a different transom than newer ones

thedonz 09-25-2009 08:05 PM


Originally Posted by rbr2328 (Post 2960639)
Yea but TONTO is perfect. It is meticulously maintained by the most particular boat owner I have ever met. TONTO does not have any bad history and if any boat has a high value it is TONTO. TONTO is to the 41's what Kemosabe is to the 47's the Holy Grail of Apaches.

ditto

mike

Comanche3Six 09-25-2009 08:29 PM


Originally Posted by offshoredrillin (Post 2960698)
it's getting a little old Ed, just saying:cool:

Yeah, b!tchin gets old........stay positive!
It's not all that bad.

Crash-Box 09-25-2009 09:11 PM


Originally Posted by el indio (Post 2960718)
A Short Canadian If I Remember..stored With Marc Adams...tommy O'quin Used To Bring The Boats To Bobbys To Launch...m.m...

Yup,

I remember Chuck & Racer "R" running WarPath
in a few Mi-ami area races, many a moons ago........

Adios............. c.b.

el indio 09-26-2009 12:04 AM


Originally Posted by Crash-Box (Post 2960768)
Yup,

I remember Chuck & Racer "R" running WarPath
in a few Mi-ami area races, many a moons ago........

Adios............. c.b.

THAT BOAT HAS HAD MANY OWNERS..HOW MANY CAN YOU NAME...CHUCK WAS CHARLIE FROM ROUGH AND TUMBLE?..ANOTHER CANADIAN...CYA..

DirtyMoney 09-26-2009 12:06 AM


Originally Posted by sean stinson (Post 2960719)
lets not go over this again.....early Apaches have a different transom than newer ones

I know i explained the differences earlier. That quoted post is the answer to the original question.

What about 41 decks? Is the fairing location the same on all of them? Is cockpit increased from engine and dash configuration? My mold has the long dash and 8 ft race hatches. I can increase a bunch by eliminating alot of the dash and shortening the hatches and going with a short stagger.

Were the cabins a liner or built in?

One of my favorite user friendly cockpits is Tatonka.

Crash-Box 09-26-2009 08:28 AM


Originally Posted by el indio (Post 2960826)
THAT BOAT HAS HAD MANY OWNERS..HOW MANY CAN YOU NAME...CHUCK WAS CHARLIE FROM ROUGH AND TUMBLE?..ANOTHER CANADIAN...CYA..


Yes Charlie , and that is as far back as I can remember
on the owners of "Warpath". After Charlie I think it was
Jay in boston with his wrench "big" Carl Patsky ?

CYA..... Heading south to see HAMMERHEAD !!!!

Panther 09-27-2009 09:25 PM

I remember when it was in Boston, they even had a website for the boat back then.

c_deezy 09-28-2009 01:29 PM


Originally Posted by rbr2328 (Post 2960828)
I know i explained the differences earlier. That quoted post is the answer to the original question.

What about 41 decks? Is the fairing location the same on all of them? Is cockpit increased from engine and dash configuration? My mold has the long dash and 8 ft race hatches. I can increase a bunch by eliminating alot of the dash and shortening the hatches and going with a short stagger.

Were the cabins a liner or built in?

One of my favorite user friendly cockpits is Tatonka.

What are you doing with your molds? Have you leased them out to anybody to have any boats pulled from them? Just curious...

sean stinson 09-28-2009 04:35 PM


Originally Posted by el indio (Post 2960718)
A Short Canadian If I Remember..stored With Marc Adams...tommy O'quin Used To Bring The Boats To Bobbys To Launch...m.m...

Bob Waxman was his name I think!!!!


All times are GMT -5. The time now is 06:13 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.