Hammerhead??
Charter Member
09-25-2009, 08:05 PM
#112
Registered
mike
Platinum Member
09-25-2009, 09:11 PM
#114
Registered
09-26-2009, 12:04 AM
#115
09-26-2009, 12:06 AM
#116
Registered
What about 41 decks? Is the fairing location the same on all of them? Is cockpit increased from engine and dash configuration? My mold has the long dash and 8 ft race hatches. I can increase a bunch by eliminating alot of the dash and shortening the hatches and going with a short stagger.
Were the cabins a liner or built in?
One of my favorite user friendly cockpits is Tatonka.
09-26-2009, 08:28 AM
#117
Registered
Yes Charlie , and that is as far back as I can remember
on the owners of "Warpath". After Charlie I think it was
Jay in boston with his wrench "big" Carl Patsky ?
CYA..... Heading south to see HAMMERHEAD !!!!
Gold Member
09-28-2009, 01:29 PM
#119
Registered
iTrader: (1)
Join Date: Aug 2006
Location: Ontario, OH
Posts: 2,465
Likes: 0
Received 0 Likes
on
0 Posts
I know i explained the differences earlier. That quoted post is the answer to the original question.
What about 41 decks? Is the fairing location the same on all of them? Is cockpit increased from engine and dash configuration? My mold has the long dash and 8 ft race hatches. I can increase a bunch by eliminating alot of the dash and shortening the hatches and going with a short stagger.
Were the cabins a liner or built in?
One of my favorite user friendly cockpits is Tatonka.
What about 41 decks? Is the fairing location the same on all of them? Is cockpit increased from engine and dash configuration? My mold has the long dash and 8 ft race hatches. I can increase a bunch by eliminating alot of the dash and shortening the hatches and going with a short stagger.
Were the cabins a liner or built in?
One of my favorite user friendly cockpits is Tatonka.
