Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Apache (https://www.offshoreonly.com/forums/apache-55/)
-   -   Broken Blower Belt (https://www.offshoreonly.com/forums/apache/237943-broken-blower-belt.html)

BattleCry 09-02-2010 12:39 AM

Sorry to continue the hijack, but, what's the story on the Exciter boat that I saw in LOTO this weekend? I don't believe that I have seen that boat before.

baywatch 09-02-2010 07:54 AM


Originally Posted by BattleCry (Post 3197891)
Sorry to continue the hijack, but, what's the story on the Exciter boat that I saw in LOTO this weekend? I don't believe that I have seen that boat before.

It has been at the lake for years. I believe the owners name is John and have spoken to him before in St. Peters, Mo when he was working on an american offshore cat out infront of his home.

There is currently 2 41's (exciter,renegade), my 36', and steves old 28' that call the lake home. This past weekend blue moon 36' was visiting for the festivities.

I believe exciter was in Florida when he purchased it and he told me he went through the motors a couple of winters ago.

All I know is I was trying to leave at the same time as him on Saturday and by the time I got through the no wake he was long gone eating up the bumps.

Panther 09-02-2010 07:56 AM


Originally Posted by maui9 (Post 3194950)
Here's one that sounds easy that is driving me nuts. I broke the blower belt on one of our 800's, and it was my last belt. The belt reads "Super Chiller 680K16".

I bought the 1700mm belt from TBS, which was the longest one they had, and it was too short. Any ideas???


FYI - Boat runs bad without a blower belt... go figure...

Is it an 800's SC or just an 800 hp blower engine?

Is it a rib, 8MM or 1/2" pitch?

There's a company called Jason that makes blower belts. You may also be able to get it from Weiand. I got my last set of belts from Summit, they were Weiand belts.

Frank

maui9 09-02-2010 09:20 AM

800SC's The belt is a 16-rib belt, and measures on the long side of 68 inches.

Thanks for the help.

Panther 09-02-2010 10:55 AM

You lookin for this?
http://teaguecustommarine.com//store...oducts_id=1561

Or

http://teaguecustommarine.com//store...oducts_id=1559

maui9 09-02-2010 04:12 PM

YES!!! Awesome!! Thank you so much. I owe you a cold one.

Panther 09-03-2010 07:42 AM

One Apache brother to another!:drink:

maui9 09-03-2010 12:43 PM

Too bad, I won't see the belt until next week. Lake Michigan forecast today is for waves up to 14 feet if you go out a ways. That would be wild!!! I tried 10's in a 35 Fountain... not so much fun.

WesSmith 09-07-2010 09:59 AM

How's my old boat treating ya !!

maui9 09-08-2010 11:42 AM

Hey Wes!! What's up? Did you get another boat yet??

Your old boat hates me. Trailer axles have bent, tires have blown, blower shafts have sheared, belts have broken (obviously), battery chargers have fried, carbs have clogged, water pumps have puked, guages died, fuses have blown, bought new exhaust-but the water Feds didn't approve, so I bought different ones, bilge pumps failed and through hull fittings have leaked (bad combo)... and I've only put 20 hours on the boat.

Having said that, Apaches rock, and I will never own another performance boat without an Indian head on the side...


All times are GMT -5. The time now is 02:24 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.