Apache Scout Restoration

Reply Subscribe

Thread Tools

03-13-2014 | 08:48 PM

#51

Panther

Thread Starter

Frank's Marine Service

Joined: Sep 2002

Posts: 11,959

Likes: 142

From: Elkton, MD

Quote:

Originally Posted by Katanna

Nice lope to it. What cam did you use?

It's a custom cam. Bullet Cams (CHS284/292HR112+4), DUR @ .050 230/238, .530/.530, LSA 112, INT C/L 108

03-30-2014 | 06:41 AM

#52

Panther

Thread Starter

Frank's Marine Service

Joined: Sep 2002

Posts: 11,959

Likes: 142

From: Elkton, MD

Dyno'ed yesterday. The engine made 429hp and 416ft. lbs. tq. fully dressed with accessories and wet Stainless Marine exhaust.

03-30-2014 | 10:39 AM

#53

Ike

Charter Member#93

Joined: Oct 2000

Posts: 1,131

Likes: 13

From: The Burbs

Damm Frank nice #'s what are the specs on that engine?

__________________
Gellner Engineering 1025"s

03-30-2014 | 08:43 PM

#54

Panther

Thread Starter

Frank's Marine Service

Joined: Sep 2002

Posts: 11,959

Likes: 142

From: Elkton, MD

Yo Ike!

It's a 355" SBC, 10.2:1 compression. SRP forged pistons, Eagle H-beam rods, GM forged crank, Edelbrock E-tec 220 heads and a hydraulic roller cam listed above with mercruiser MEFI fuel injection.

04-01-2014 | 10:36 AM

#55

jcs8675309

Registered

Joined: Apr 2012

Posts: 42

Likes: 0

From: Upper Chesapeake

Pretty sure he meant dammmmmmn trent!

04-14-2014 | 09:36 PM

#56

Panther

Thread Starter

Frank's Marine Service

Joined: Sep 2002

Posts: 11,959

Likes: 142

From: Elkton, MD

Took the boat out Saturday and Sunday. Still have to finish the hatch though.

Attached Thumbnails

Apache Scout Restoration-img_20140412_142521465_hdr.jpg

Apache Scout Restoration-img_20140413_122826503.jpg

04-17-2014 | 10:25 AM

#57

Panther

Thread Starter

Frank's Marine Service

Joined: Sep 2002

Posts: 11,959

Likes: 142

From: Elkton, MD

Glasswork on the underside of the hatch complete. Time to turn the attention to finishing the topside.

04-17-2014 | 10:31 AM

#58

J-Bonz

Registered

Joined: Dec 2003

Posts: 5,976

Likes: 495

From: Cleveland, OH / Pewaukee, WI

Quote:

Originally Posted by Panther

Took the boat out Saturday and Sunday. Still have to finish the hatch though.

Lookin good!

04-17-2014 | 01:43 PM

#59

Panther

Thread Starter

Frank's Marine Service

Joined: Sep 2002

Posts: 11,959

Likes: 142

From: Elkton, MD

Quote:

Originally Posted by J-Bonz

Lookin good!

Thanks! It's been a long 1 yr road. Happy it's almost over but at the same time sorta burnt out on it and want to go boating instead of turning wrenches.

04-17-2014 | 02:28 PM

#60

J-Bonz

Registered

Joined: Dec 2003

Posts: 5,976

Likes: 495

From: Cleveland, OH / Pewaukee, WI

Quote:

Originally Posted by Panther

Thanks! It's been a long 1 yr road. Happy it's almost over but at the same time sorta burnt out on it and want to go boating instead of turning wrenches.

Yeah, I hear ya. We all want a project until we are knee deep in it...

Reply Share

First
Prev
6 / 9
Next
Last