|
Didn't get much done yesterday except make room in the Shop to put the Apache inside. I know I have a lot of work to do on Her but, I am shooting for Mid June to be in the water!
Todd |
3 Attachment(s)
[ATTACH=CONFIG]541501[/ATTACH][ATTACH=CONFIG]541502[/ATTACH][ATTACH=CONFIG]541503[/ATTACH]
|
2 Attachment(s)
[ATTACH=CONFIG]541504[/ATTACH][ATTACH=CONFIG]541505[/ATTACH]
|
5 Attachment(s)
[ATTACH=CONFIG]541506[/ATTACH][ATTACH=CONFIG]541507[/ATTACH][ATTACH=CONFIG]541508[/ATTACH][ATTACH=CONFIG]541509[/ATTACH][ATTACH=CONFIG]541510[/ATTACH]
|
I wouldnt cut the stringers any more than you need to get the new plywood in. Maybe just cut enough now to get the old out then see how much more you really need when trying to stuff two layers of 3/4 ply in the back of the boat. Good times! start praying now that your stringers are solid.
search for "corebond" in the fiberglass section, its the best way to go for bedding the new transom in |
Originally Posted by sparky24
(Post 4309911)
I wouldnt cut the stringers any more than you need to get the new plywood in. Maybe just cut enough now to get the old out then see how much more you really need when trying to stuff two layers of 3/4 ply in the back of the boat. Good times! start praying now that your stringers are solid.
search for "corebond" in the fiberglass section, its the best way to go for bedding the new transom in Todd |
1 Attachment(s)
2.5 hours into this project and this is all I got done...[ATTACH=CONFIG]541583[/ATTACH]
|
1 Attachment(s)
[ATTACH=CONFIG]541584[/ATTACH]
|
2 Attachment(s)
Oh. And I found both stringers rotted
[ATTACH=CONFIG]541586[/ATTACH] I need a beer! Uggggg |
1 Attachment(s)
Oh. And I found both stringers rotted
[ATTACH=CONFIG]541586[/ATTACH] I need a beer! Uggggg |
| All times are GMT -5. The time now is 03:11 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.